Skip to main content
Download PDF
  • Research article
  • Open access
  • Published:

A novel arabinose-inducible genetic operation system developed for Clostridium cellulolyticum

Biotechnology for Biofuels volume 8, Article number: 36 (2015) Cite this article

Abstract

Background

Clostridium cellulolyticum and other cellulolytic Clostridium strains are natural producers of lignocellulosic biofuels and chemicals via the consolidated bioprocessing (CBP) route, and systems metabolic engineering is indispensable to meet the cost-efficient demands of industry. Several genetic tools have been developed for Clostridium strains, and an efficient and stringent inducible genetic operation system is still required for the precise regulation of the target gene function.

Results

Here, we provide a stringent arabinose-inducible genetic operation (ARAi) system for C. cellulolyticum, including an effective gene expression platform with an oxygen-independent fluorescent reporter, a sensitive MazF-based counterselection genetic marker, and a precise gene knock-out method based on an inducible ClosTron system. A novel arabinose-inducible promoter derived from Clostridium acetobutylicum is employed in the ARAi system to control the expression of the target gene, and the gene expression can be up-regulated over 800-fold with highly induced stringency. The inducible ClosTron method of the ARAi system decreases the off-target frequency from 100% to 0, which shows the precise gene targeting in C. cellulolyticum. The inducible effect of the ARAi system is specific to a universal carbon source L-arabinose, implying that the system could be used widely for clostridial strains with various natural substrates.

Conclusions

The inducible genetic operation system ARAi developed in this study, containing both controllable gene expression and disruption tools, has the highest inducing activity and stringency in Clostridium by far. Thus, the ARAi system will greatly support the efficient metabolic engineering of C. cellulolyticum and other mesophilic Clostridium strains for lignocellulose bioconversion.

Background

Lignocellulosic biomass is the most abundant and renewable raw material on Earth, and its sustainability and effective cost make it an attractive feedstock of carbon source [1-4]. Because of the complex composition and recalcitrant structure, the application of lignocellulose is difficult [5,6]. Consolidated bioprocessing (CBP) is considered an optimal strategy for lignocellulose conversion because it integrates enzyme production, cellulose hydrolysis, and fermentation in one step to reduce cost and simplify processing [6-8]. Clostridium cellulolyticum and many other cellulolytic and solventogenic Clostridium species are promising CBP candidates because of their capability to degrade lignocellulose, but systems metabolic engineering of clostridial strains is still necessary to satisfy industrialization [9,10].

Although complex cell wall and anaerobic growth conditions of Clostridium make genetic manipulation difficult, a few genetic manipulation methods have been developed recently, including gene disruption methods via either homologous recombination or intron retrohoming mechanism [11-14] and heterologous gene expression methods using replicative or integrative plasmids [15,16]. Inducible gene expression tools are required in the metabolic engineering for Clostridium strains because the precise regulation of the target gene function is crucial for either the native pathway engineering or heterologous gene introduction in chassis strains [17,18]. Moreover, several clostridial genetic tools in hand can be improved with an effective inducible gene expression system. For example, toxic gene-derived counterselection markers can be developed in Clostridium strains by using an inducible promoter for seamless and successive genome editing [19,20]. ClosTron is a gene targeting method derived from a mesophilic mobile group II intron Ll.ltrB [21-23]. It has been extensively used in the gene disruption of Clostridium strains [24-28], but its high off-targeting activity affects precise genetic engineering [29]. According to the ribozyme-based DNA integration mechanism of targetron [30], the DNA targeting specificity can be improved by precise management of the expression of intron RNA and intron-encoded protein (IEP) [22,31] using a proper inducible gene expression system.

An ideal inducible gene expression system should have high inducing efficiency, stringency, and specificity to an exogenous inducer innocuous to the host cell, with which the expression level of the target gene as well as the function of the related pathway can be easily regulated theoretically [32]. Various inducible gene expression systems have been constructed, such as the well-known isopropyl-β-d-thiogalactoside (IPTG)/lactose-inducible lac system, tetracycline-inducible tet system, and arabinose-inducible ara system [33-35]. Both lac system and tet system use a repressor binding to the operator lacO/tetO in the absence of specific inducers, and the addition of the inducer can activate downstream gene expression [34]. Although relatively high background expression has been observed [36], a typical lac system LacI-lacO is used to develop the inducible T7 gene expression system, which is widely used in Escherichia coli strains for heterologous protein expression [37]. When applied in Clostridium strains, the inducing efficiencies of lactose-inducible promoters are relatively low [18,38]. In addition to the lactose-inducible promoter, tet system has also been used in the controlled gene expression of non-cellulolytic Clostridium acetobutylicum, termed Pcm-2tetO1 [20,39]. Pcm-2tetO1 can up-regulate gene expression by 313-fold with anhydrotetracycline as an inducer, which is the highest inducing efficiency among the reported inducible promoters applied in the genus Clostridium [18,20,38-42]. The optimal working condition of Pcm-2tetO1 requires a high inducer dosage, but elevated concentration of anhydrotetracycline shows significant inhibitive effects on cell growth [20]. AraC-P BAD derived from E. coli is the most well-known ara inducible system, which uses AraC as either an activator or a repressor to control the expression of downstream genes [33], and has been used in several Gram-negative and Gram-positive bacteria [43-46], but not in Clostridium strains so far. Thus, novel inducible gene expression systems with high inducing capability as well as proper inducers are required for the metabolic engineering of Clostridium strains.

No inducible promoter has been developed for the cellulolytic species C. cellulolyticum by far [39]. It is reported that the metabolism of L-arabinose is regulated by C. acetobutylicum at the transcriptional level using an AraR-mediated regulation system [47,48]. In the present study, we develop an arabinose-inducible promoter based on the AraR-regulon of C. acetobutylicum. Using this inducible promoter, a novel arabinose-inducible genetic operation system, termed ARAi, is constructed for C. cellulolyticum. Our results confirm that the ARAi system can be used to regulate gene expression in C. cellulolyticum with high stringency and activity. Furthermore, the ARAi system provides an inducible ClosTron method for precise gene knock-out in C. cellulolyticum, which can facilitate the systems metabolic engineering of C. cellulolyticum and other Clostridium strains for commodity and industry.

Results

Construction of the arabinose-inducible expression system

Sensitive regulation of L-arabinose metabolism with AraR as the key repressor has been observed and characterized in Bacillus subtilis [49] as well as C. acetobutylicum [47,48]. The AraR-regulon members of C. acetobutylicum include 11 genes involved in arabinose utilization, transport, and conversion via the phosphate pentose pathway [47], in which the expression of gene ptk, encoding a phosphoketolase, showed the most sensitivity to the inducer L-arabinose [47]. Hence, to obtain enhanced induction activity, we selected the promoter of ptk and the araR regulator expression cassette of C. acetobutylicum to construct the ARAi system (Additional file 1). Then, 370-bp from the upstream region of ptk was used as the promoter P ptk to make sure that the binding site of AraR was covered [47]. The self-regulation of AraR was observed [47], so the predicted native promoter and terminator regions of araR were employed in the araR expression cassette (Additional file 1).

Controlled expression of an oxygen-independent green fluorescent protein PpFbFPm in C. cellulolyticum using the ARAi system

Although the araR-binding sequences in C. acetobutylicum and C. cellulolyticum were distinct [47], whether the ARAi system could be interfered by the indigenous arabinose-inducible system of C. cellulolyticum was not certain. Thus, the availability of ARAi system in C. cellulolyticum was tested using an oxygen-independent green fluorescent protein PpFbFPm as the reporter [14]. The plasmid pARA-PpFbFPm including both P ptk -PpFbFPm and AraR expression cassettes was constructed for ARAi-regulated expression of PpFbFPm. The control plasmid pPTK-PpFbFPm was also constructed for constitutive expression of PpFbFPm without the expression of AraR repressor (Table 1, Additional file 1).

Table 1 Bacterial strains and plasmids used in this study
Full size table

C. cellulolyticum strains H10::pARA-PpFbFPm and H10::pPTK-PpFbFPm, carrying pPTK-PpFbFPm or pARA-PpFbFPm, respectively, were cultivated with or without addition of L-arabinose, and the intracellular expression of PpFbFPm was investigated by green fluorescence imaging. As shown in Figure 1A, intense green fluorescence was observed in cells of H10::pPTK-PpFbFPm with or without L-arabinose, which confirmed that the ptk promoter originating from C. acetobutylicum was not recognized and regulated by native AraR in C. cellulolyticum. In contrast, H10::pARA-PpFbFPm showed no green fluorescence emission without L-arabinose (Figure 1B), providing a consistent result with previous reports that AraR functioned as a repressor rather than an activator [47]. With addition of L-arabinose, cells of H10::pARA-PpFbFPm showed bright green fluorescence similar to that of H10::pPTK-PpFbFPm, which was indicative of strongly induced expression of PpFbFPm (Figure 1B). These results suggested that the ARAi system was available for controlled expression of target protein in C. cellulolyticum. The expression of green fluorescence protein was observed in E. coli host cells containing pARA-PpFbFPm whether the inducer was added or not. This indicated the expression leakage in E. coli, and suggested that the ARAi system should not be used in E. coli strains.

Figure 1
figure 1

Confirmation of PpFbFPm expression in C . cellulolyticum H10 by in vivo fluorescent imaging. C. cellulolyticum cells containing pPTK-PpFbFPm (A) or pARA-PpFbFPm (B) grown at mid-log phase were induced with 10 g/L L-arabinose at 34°C for 2 h or without induction and were used to detect the intracellular fluorescence. 1, 3 corresponds to cell morphology; 2, 4 corresponds to fluorescent imaging; 1, 2 shows cells without induction; 3, 4 shows cells with induction.

Full size image

The efficiency and stringency of ARAi system in C. cellulolyticum

The crude enzyme of H10::pARA-GusA was used to determine the efficiency of the ARAi system in C. cellulolyticum by β-glucuronidase (GusA) assay using both chromogenic substrate 5-bromo-4-chloro-3-indolyl-β-D-glucuronic acid (X-gluc) and fluorogenic substrate 4-methylumbelliferyl-β-D-glucuronic acid (MUG) [20]. H10::pARA-PpFbFPm was used as a negative control (Table 1).

With X-gluc as a substrate, the enzymatic reaction mixture of H10::pARA-PpFbFPm showed no change, as well as that of H10::pARA-GusA without induction of L-arabinose, indicating no expression of GusA. However, the crude enzyme of H10::pARA-GusA turned the colorless solution into dark blue when L-arabinose was added (Figure 2A). These results suggested strict and efficient induction activity of ARAi system in C. cellulolyticum. When tested with MUG as the substrate, the GusA activity of H10::pARA-GusA was 106.1 ± 8.7 U/mg and was stimulated 100-fold after induction for 0.5 h, indicating that the ARAi system was efficient in C. cellulolyticum. H10::pARA-PpFbFPm without L-arabinose induction also showed 26.4 ± 2.8 U/mg activity, which might be a slight expression leakage or the fluorescent background of the reaction system.

Figure 2
figure 2

Investigation of the efficiency and stringency of the ARAi system in C . cellulolyticum H10. (A) Determination of inducible expression of GusA in H10::pARA-GusA with X-gluc as a substrate. The blue colors of the reaction solutions indicate the induced expression of GusA. The numbered tubes contained: 1, negative control without crude enzyme sample; 2, H10::pARA-PpFbFPm; 3, H10::pARA-GusA without L-arabinose; 4 to 6, H10::pARA-GusA with 0.1, 1 and 10 g/L L-arabinose, respectively. (B) Determination of GusA activity during a time course (0 to 6 h) using MUG as a substrate. Then 1 g/L L-arabinose was used as the inducer. (C) Determination of the influence of inducer dosage (0 to 10 g/L) on GusA activity using MUG as a substrate. The induction time was 2 h.

Full size image

To further test the activity of the ARAi system response to induction duration, GusA activity in H10::pARA-GusA was examined during a time course (0 to 6 h) with addition of 1 g/L L-arabinose. GusA activity increased dramatically and reached a maximum level of approximately 9.0 × 104 U/mg after a 2-h induction (Figure 2B). Then, the influence of the inducer dosage on GusA activity was measured by supplementing 0 to 10 g/L L-arabinose as an inducer. The induction time was 2 h. As shown in Figure 2C, GusA activity was significantly stimulated by over 800-fold with increased dosage of the inducer, whereas further addition of L-arabinose from 0.1 g/L up to 10 g/L barely enhanced GusA activity. Thus, the optimum induction condition of ARAi system was 0.1 g/L L-arabinose with 2-h incubation, indicating high inducibility and efficiency of the ARAi system.

The inducer specificity and inhibition effect on the ARAi system in C. cellulolyticum

In addition to L-arabinose, several sugars including D-arabinose, D-glucose, D-xylose, D-fructose, D-galactose, and D-mannose were used to investigate the inducer specificity of the ARAi system, and the induced GusA activity in H10::pARA-GusA cells was monitored to determine the inducing activity. All selected sugars could be accumulated by C. cellulolyticum H10 except D-arabinose. L-arabinose showed over 1000-fold higher inducing activity than the other sugars, which indicated that L-arabinose was the specific inducer of the ARAi system (Figure 3). Surprisingly, the addition of D-xylose, D-glucose, D-galactose, or D-mannose significantly inhibited the induction activity of L-arabinose by approximately 40- to 500-fold, whereas D-fructose showed slight influence (Figure 3).

Figure 3
figure 3

The inducer specificity and inhibition effect of the ARAi system. H10::pARA-GusA was first cultivated with cellobiose to mid-log phase, and 1 g/L of various sugars were used to test the inducer specificity of the ARAi system, including L-arabinose (L-Ara), D-arabinose (D-Ara), D-glucose (Gluc), D-xylose (Xyl), D-fructose (Fruc), D-galactose (Galac), and D-mannose (Mann). The inhibition effect of the ARAi system was detected with a mixture of 1 g/L L-arabinose with 1 or 10 g/L of other sugars as inducers. A blank control without inducer was prepared, and the values of all samples were standardized by subtracting the value of the blank control. The induction time was 2 h. Three independent experiments were performed to calculate the average values and standard errors.

Full size image

L-arabinose can be utilized by C. cellulolyticum as a carbon source, thus the inducing activity of ARAi may be influenced if the induction period is prolonged. To test the stability of the ARAi system in C. cellulolyticum, L-arabinose induction of H10::pARA-GusA was performed for 3 days and both GusA activity and residual L-arabinose and cellobiose in broth were monitored. The results showed that 1 g/L L-arabinose could be completely utilized by H10::pARA-GusA in 12 h, at which time point the GusA activity decreased by 36% (Additional file 2). This indicated that the consumption of L-arabinose affected the inducing activity of the ARAi system. GusA activity was also detected and slightly decreased after 12 h of incubation, which might be explained by the stability of the GusA protein in C. cellulolyticum cells or the persistent binding of intracellular L-arabinose with AraR.

We further investigated whether the L-arabinose utilization could be affected by the potential carbon catabolize repression (CCR) effect in C. cellulolyticum H10 by the addition of cellobiose, D-glucose, or D-xylose with L-arabinose simultaneously. Although no typical CCR diauxie growth was observed, we detected slower utilization of L-arabinose than D-glucose or D-xylose by C. cellulolyticum H10 in batch fermentation (Figure 4). L-arabinose (5 g/L) was completely used in 60 h as a single carbon source, whereas the addition of D-glucose or D-xylose decreased the assimilation rate of L-arabinose, and no more utilization was detected after 80 h of cultivation. In contrast, supplementation of cellobiose showed a slight effect on the utilization rate of L-arabinose (Figure 4). The results indicated competitive transport of L-arabinose with other monoses, which might cause the inhibition effect of ARAi system in C. cellulolyticum.

Figure 4
figure 4

The growth analysis of C . cellulolyticum H10 using various sugars as carbon sources. 5 g/L L-arabinose or sugar mixtures (L-arabinose + cellobiose, L-arabinose + D-xylose, or L-arabinose + D-glucose) were used as carbon sources. Cell growth was determined by monitoring the optical density at 600 nm (OD600nm, red square). The residual carbon sources in broth were measured by HPLC. Green triangle, L-arabinose; blue diamond, cellobiose; black cycle, xylose; purple square, glucose. Three independent cultivations were used to calculate average values and standard errors.

Full size image

Establishment of a counterselection genetic marker MazF in C. cellulolyticum using the ARAi system

Counterselection markers are important genome editing tools for systems metabolic engineering, and one of the prerequisites of developing a toxin-based counterselection marker, such as MazF, is a stringent inducible regulation system to tightly control the toxic gene expression [19]. Using the developed inducible promoter, a counterselection marker MazF was established in the ARAi system for C. cellulolyticum.

MazF cleaves mRNA at ACA sequences and is toxic to host cell growth [50], and strictly controlled expression of MazF is essential for the construction of the genetic marker [19,51]. We failed to construct the plasmid pARA-MazF by ligating mazF gene directly to the downstream of the ARAi promoter in E. coli DH5α, which may be explained by the expression leakage of the ARAi system in E. coli. In the MazEF toxin-antitoxin system, MazE acts as the antitoxin and interacts with MazF. Thus, we planned to firstly introduce the expression of mazE under the control of a T7 promoter/terminator to protect the host cell from the released MazF [52]. In principle, MazE would only be expressed in strains possessing the T7 RNA polymerase system, such as the E. coli BL21(DE3) strain, with the presence of the inducer IPTG, and would not interfere with the function of MazF as a counterselection maker in C. cellulolyticum. The plasmid pARA-MazE was successfully constructed by cloning a T7-mazE cassette into pARA-PpFbFPm. However, no BL21(DE3) transformants were obtained with or without addition of IPTG when mazF was ligated into pARA-MazE. Surprisingly, the target plasmid pARA-MazE/F was successfully created in the E. coli DH5α strain containing no T7 RNA polymerase and without IPTG induction (Table 1, Additional file 1), with no clear explanation.

pARA-MazE/F was then transformed into C. cellulolyticum H10. The obtained strain H10::pARA-MazE/F was plated onto erythromycin-containing solid GS-2 medium with or without addition of L-arabinose to test the availability of the counterselection marker MazF in C. cellulolyticum. H10::pARA-PpFbFPm was also tested as a control. In principle, the induced expression of MazF would be lethal to the host cell unless the expression vector was cured. We observed that the growth of control strain H10::pARA-PpFbFPm showed no difference with the presence of either erythromycin (Ery+, Ara−), L-arabinose (Ery−, Ara+), or both (Ery+, Ara+) (Figure 5B). H10::pARA-MazE/F grew regularly on the erythromycin supplemented agar plate without L-arabinose (Ery+, Ara−), but did not grow when both L-arabinose and erythromycin were added (Ery+, Ara+) (Figure 5A), suggesting that the expression of toxic MazF was strictly induced by L-arabinose.

Figure 5
figure 5

Availability of the counterselection marker MazF in C . cellulolyticum H10. Cells of H10::pARA-MazE/F (A) and H10::pARA-PpFbFPm (B) were plated onto solid GS-2 medium with (superscript +) or without (superscript −) addition of erythromycin (Ery) or L-arabinose (Ara).

Full size image

In addition, H10::pARA-MazE/F cells grew normally on the agar plate containing only L-arabinose but no erythromycin (Ery−, Ara+) (Figure 5A). The colonies were randomly selected and inoculated into fresh liquid GS-2 medium with (Ery+) or without (Ery−) erythromycin, and no growth was observed in Ery+ medium. This indicated that without the selection stress of antibiotics, the plasmid pARA-MazE/F was cured due to the induced expression of MazF. Hence, the establishment of the counterselection system pARA-MazE/F not only verified the stringency of ARAi system in C. cellulolyticum but also provided an efficient inducible counterselection marker for further seamless genetic manipulation.

Development of an inducible ClosTron using ARAi system

Because of its high efficiency, ClosTron has been extensively used in the gene disruption of mesophilic Clostridium strains [24-26,28], but a deficiency of low target specificity still remains in the targetron methods. We hypothesized that off-target integrations of targetron occurred due to sequence similarity to the desired target site and continuous expression of targetron elements. Therefore, the off-target frequency might decrease if the expression of targetron is controlled using an inducible gene expression system instead of the strong ptb (phophotransbutyrylase) promoter [25].

To verify this hypothesis, we modified two reported targetron plasmids pSY6-mspI [14] and pGZ-PyrF-cipC [11] using the developed arabinose-inducible promoter, and obtained pARA-PyrF-mspI and pARA-PyrF-cipC targeting mspI and cipC genes, respectively (Table 1, Additional file 1). The new targetron plasmids were transformed into the chassis strain H10ΔpyrF, and the desired mutants H10ΔpyrFΔmspI and H10ΔpyrFΔcipC were obtained following a two-step procedure as described [11], except that, in the first step, transformants were inoculated and cultivated in antibiotic-free medium and L-arabinose induction was performed for controlled expression of intron RNA and IEP. The effect of L-arabinose induction was investigated by PCR before 5-fluoroorotic acid (FOA) screening. The PCR results of transformants carrying pARA-PyrF-mspI or pARA-PyrF-cipC showed both bands with or without a full-length (0.9 kb) intron sequence (Figure 6), indicating that the colonies were a mixture of host strain H10ΔpyrF and mutant strain H10ΔpyrFΔcipC or H10ΔpyrFΔmspI before plasmid curing (Figure 6). The bands indicating intron insertion at the desired sites became more apparent with longer induction time, which suggested that targetron expression was regulated by the ARAi system, and a novel inducible ClosTron was developed.

Figure 6
figure 6

Schematic representation and PCR confirmation of H10Δ pyrF transformants carrying pARA-PyrF- mspI or pARA-PyrF- cipC before FOA screening. Green dashed boxes indicated that the developed arabinose-inducible expression system containing a P ptk promoter and an AraR expression cassette (Additional file 1). The transformants were inoculated and cultivated in antibiotic-free medium until mid-log phase, and 1 g/L L-arabinose was added for induction for 0, 1, 2, and 4 h. Primer sets Ccel2866-F/R and Ccel0728-F/R were used for PCR flanking the intron target sites for gene mspI and cipC, respectively. The asterisks indicate the PCR products of mutants containing the 0.9-kb intron sequence, and the bands of 300 to 400 bp marked by triangles indicate the PCR products of host strain H10ΔpyrF. M, DNA marker (from top to bottom, 5000, 3000, 2000, 1500, 1000, 800, 500, and 300 bp).

Full size image

The FOA screening was performed to cure targetron plasmids for transformants of pARA-PyrF-mspI or pARA-PyrF-cipC after 0, 2, or 4 h of L-arabinose induction (Figure 6). Forty-eight or 96 colonies of each transformant were randomly chosen for colony PCR screening, and those colonies with a single band indicating the intron insertion were identified as mutants (Additional file 3). Two to six verified mutants were analyzed using southern hybridization to investigate the off-target frequency of the inducible ClosTron system. The mutants containing single intron insertion were determined as target mutants with no off-target integration, and the number of target mutants was counted to calculate the target specificity by dividing the number of all tested mutants. Both C. cellulolyticum mutants H10::MspI297s and H10ΔpyrF::CipC117a (Table 1) constructed following the reported ClosTron method [11,14] contained three off-targeted intron insertions in the genomic DNA (Additional file 4). H10ΔpyrFΔmspI and H10ΔpyrFΔcipC were constructed using the inducible ClosTron. No off-target integration was observed in H10ΔpyrFΔmspI, and only one of H10ΔpyrFΔcipC mutants showed an additional intron insertion after the arabinose induction for 4 h (Additional file 4). This result indicated that high target specificity could be obtained using the inducible ClosTron.

Discussion

Controllable regulation of gene expression is essential for either native pathway engineering or heterologous function introduction. Recognizing the importance of inducible gene expression system in metabolic engineering toward the overproduction of certain bioproducts, various inducible promoters have been developed using chemicals, light, or radiation as inducers [32], including the widely used inducible T7 expression system based on the lac promoter [33]. This inducible system requires the simultaneous regulation of the expression of T7 RNA polymerase [37], and its expression leakage and cost-inefficient inducer IPTG make it not suitable for difficult microorganisms such as Clostridium strains [36]. In this study, we provide a novel arabinose-inducible system ARAi with high inducing stringency and efficiency, and a specific inducible effect to L-arabinose.

L-arabinose is a universal carbon source, and has been used as an efficient inducer in the AraC-P BAD system derived from E. coli [33]. The promoter of AraC-P BAD system could be repressed by supplementation of glucose because of the CCR effect [33]. For the arabinose-inducible system ARAi developed in this study, the addition of L-arabinose was able to ‘turn on’ the gene expression. The addition of some other monoses can ‘turn down’ the inducing activity in C. cellulolyticum (Figure 4), which may benefit the large range of expression regulation. Thus, the ARAi system can be used to flexibly regulate the function of endogenous or heterologous gene for metabolic engineering. In addition, the gene expression can be up-regulated over 800-fold using the ARAi system, which has the highest inducing activity in Clostridium so far according to our knowledge. The low inducer dosage will contribute to cost reduction for industrialization. Whereas the influence of other sugars in the medium on the inductive efficiency and the accumulation of L-arabinose by the host cell should also be considered in further applications of the ARAi system.

Counterselection markers are required for efficient chromosomal gene deletion and integration [19], especially in those strains whose genetic manipulations rely on replicative plasmid owing to the low transformation efficiency, such as C. cellulolyticum. Two types of counterselection markers are mainly used in Clostridium strains. The first type relies on the creation of auxotrophic chassis, such as pyrF-disrupted auxotrophic mutant for uracil, and the chassis strains are usually constructed by homologous recombination [11,53]. The second type requires the strict control of toxin expression (for example, codA and mazF) and the absence of relative antitoxins (for example, upp and mazE, respectively) [19,20,54]. Benefiting from the high efficiency and stringency of the ARAi system, we successfully constructed an MazF-based counterselection marker. This inducible genetic marker provided the same function of promoting the curing of targetron plasmid (Figure 5) as the reported pyrF-based screening system [11], and could be used to achieve seamless genome editing via homologous recombination for systems metabolic engineering of C. cellulolyticum and other mesophilic Clostridium strains [19].

ClosTron is a popular and convenient tool for gene inactivation, and it has been modified previously for high targeting efficiency. For example, Jia et al. provided a scarless gene deletion approach by combining homologous recombination with ClosTron [55]. Cui et al. disrupted the MspI encoding gene in C. cellulolyticum to construct a cell chassis that requires no methylation of heterologous DNA [14], and further developed a pyrF-based assistant system for ClosTron to promote plasmid curing and enable successive gene targeting [11]. However, the low target specificity of ClosTron is still a challenge for researchers, and tedious and ineffective analyses with multiple steps are generally required and reinforced to confirm single intron insertion [29]. Highly active off-targeting has also been observed in a newly developed thermotargetron method for thermophiles [12,56]. We consider the off-targeting of targetron to be mainly caused by the short recognition sequence of intron RNA and the persistent expression of intron RNA and IEP, thus the precisely controlled expression of targetron elements may solve the off-target integration problem in C. cellulolyticum. Although a modest decrease in target specificity was observed, the application of the ARAi system dramatically enhanced the target specificity of the resulting inducible ClosTron method, and thus solved the problem of off-target integration.

Although C. cellulolyticum and C. acetobutylicum have a close phylogenetic relationship, and the ARAi system developed in this work as well as several other genetic elements used in C. cellulolyticum are derived from C. acetobutylicum [11,14,20,25,28], apparent difference in physiological and biochemical properties are present in these two species. For instance, C. acetobutylicum cannot degrade cellulose, whereas C. cellulolyticum is a typical cellulolytic microorganism producing cellulosome, a multi-enzyme complex assembled on the cell surface [57]; C. acetobutylicum barely uses D-xylose as a carbon source with the presence of D-glucose due to the CCR effect, and prefers to use L-arabinose compared to D-xylose [58], while no apparent diauxie growth pattern reflecting glucose-mediated CCR [59-61] has been observed in C. cellulolyticum, and D-xylose can be faster consumed than L-arabinose (Figure 3); C. acetobutylicum and C. cellulolyticum contain different organizations of gene clusters for D-xylose and L-arabinose utilization pathways as well as the DNA recognition motifs of transcriptional regulators [47,62]. The inducing sensitivity of ARAi system in C. cellulolyticum is similar to that of AraR-P ptk regulon in C. acetobutylicum [47]. Thus, it is feasible to investigate the application of the ARAi system in other mesophilic clostridial strains which uptake L-arabinose into the cell.

Conclusion

This study provided a stringent arabinose-inducible genetic operation system ARAi to support the metabolic engineering of C. cellulolyticum and other Clostridium strains. The ARAi system includes an effective gene expression platform with an oxygen-independent fluorescent reporter, a sensitive MazF-based counterselection genetic marker, and a precise gene knock-out method based on an inducible ClosTron system, and its inducible effect is specific to L-arabinose. Using the ARAi system, the gene expression was up-regulated over 800-fold with highly inducing stringency, and the target specificity of ClosTron was greatly improved to support precise gene disruption in C. cellulolyticum. We suggest that the ARAi system can be widely used for clostridial strains with various natural substrates, and this system will contribute to the efficient metabolic engineering of C. cellulolyticum and other mesophilic Clostridium strains for lignocellulose bioconversion.

Materials and methods

Bacterial strains and cultivation

The bacterial strains used in this study are listed in Table 1. All E. coli strains were grown aerobically at 37°C in Luria-Bertani (LB) medium with shaking at 180 rpm or on solid LB plate with 1.5% agar. Then 100 μg/mL ampicillin was supplemented when necessary. C. cellulolyticum strains were routinely cultured anaerobically at 34°C in modified GS-2 medium supplemented with 5.0 g/L cellobiose as a carbon source [14]. Furthermore, 20 μg/mL erythromycin or 500 μg/mL 5-fluoroorotic acid (FOA) dissolved in dimethyl sulfoxide was added when required.

Plasmid construction

All plasmids and primers used in this study are listed in Table 1 and Additional file 5, respectively. Plasmids containing ARAi system were constructed on the basis of pMTC6, an E. coli and C. cellulolyticum shuttle vector containing an expression cassette of an oxygen-independent fluorescent protein (PpFbFPm) under the control of a thiolase (thl) promoter and terminator [14,63]. The ARAi system consisted of a promoter P ptk and a repressor AraR. Then 370 bp from the upstream region of the phosphoketolase (ptk) encoding gene in C. acetobutylicum (CAC1343), the predicted AraR-binding site [47] was amplified with primer set Pptk-F/R and determined as promoter P ptk . The AraR-expression cassette, including the AraR encoding gene (CAC1340) and its predicted promoter and terminator regions, was amplified with primer set araR-F/R using C. acetobutylicum chromosome DNA as a template. The promoter P ptk was ligated into pMTC6 using PstI and MluI sites to replace the thl promoter and yield the plasmid pPTK-PpFbFPm. The plasmid pARA-PpFbFPm was further obtained by cloning the AraR cassette into the PstI site of pARA-PpFbFPm for inducible expression of fluorescent protein in C. cellulolyticum (Figure 1A). pARA-GusA and pARA-MazE/F were constructed based on pARA-PpFbFPm for GusA and MazF expression, respectively. The gusA gene was amplified from plasmid pGusA2-2tetO1 [20] using primer set gusA-F/R and ligated into pARA-PpFbFPm by double digestion with NheI and SalI to take the place of PpFbFPm (Figure 1A). To construct pARA-MazE/F, mazE and mazF genes were cloned from the genomic DNA of E. coli BL21(DE3) with primer sets MazE-BL21-F/R and MazF-BL21-F/R and ligated into pARA-PpFbFPm in turn using NarI site and MluI and SalI sites, respectively (Additional file 1).

Targetron plasmids were constructed based on pSY6-mspI [14] or pGZ-cipC [11]. The entire ARAi system including P ptk promoter and AraR cassette was amplified from pARA-PpFbFPm with primer set int-araR/int-Pptk, and cloned into pSY6-mspI or pGZ-cipC to replace ptb promoter using XmaI and XhoI sites to generate pARA-mspI or pARA-cipC, respectively. Targetron plasmids pARA-PyrF-mspI and pARA-PyrF-cipC were finally obtained by cloning the P fd -PyrF expression cassette into the XmaI site of pARA-mspI and pARA-cipC, respectively, as described by [11] (Additional file 1).

Electroporation of C. cellulolyticum

Plasmid methylation with MspI methyltransferase, competent cell preparation, and electroporation of C. cellulolyticum were precisely performed as described in previous studies [11,14]. All manipulations were performed under anaerobic conditions. Transformants carrying target plasmids were selected on solid GS-2 medium supplemented with erythromycin.

Fluorescent microscopy

In vivo expression of PpFbFPm was monitored with a BX51TRF fluorescent microscope (Olympus Corporation, Shinjuku-ku, Japan). Five hundred microliters of C. cellulolyticum cells grown at mid-log phase were harvested by centrifugation, washed twice and resuspended in 20 μL of distilled water. Two microliters of the resuspended cells were used for imaging of intracellular fluorescence (Ex = 460–490 nm, Em = 520 nm).

β-Glucuronidase assays

For the β-glucuronidase assay, C. cellulolyticum strains were cultivated in 100-mL serum bottles until late-log phase with 5 g/L cellobiose as carbon source. Then, 0–10 g/L various sugars (L-arabinose, D-arabinose, D-xylose, D-fructose, D-galactose, or D-mannose) or sugar combinations (L-arabinose + D-glucose, L-arabinose + D-xylose, L-arabinose + D-fructose, L-arabinose + D-galactose, or L-arabinose + D-mannose) were supplemented as inducers. Inducible expression was sustained for 0 to 6 h at 34°C, and the crude enzyme samples were prepared according to a modified protocol [20]. In detail, 30 mL C. cellulolyticum cultures were chilled in an ice-water bath for 20 min, and centrifuged at 5000 × g for 10 min at 4°C. The cell pellets were washed twice with 30 mL of ice-cold Tris-EDTA buffer (10 mM Tris–HCl, 1 mM EDTA, pH 8.0) and resuspended in 2 mL GusA buffer (50 mM sodium phosphate, 1 mM EDTA, pH 7.0). Cell lysis was achieved by sonication under following conditions: 30% duty cycle, 3 s sonication with a 3 s pause for 10 min (Scientz-IID, Scientz Biotech Company, Ningbo, China). The resulting lysates were centrifuged at 8000 × g for 15 min at 4°C, and the obtained supernatants were used as crude enzyme samples for GusA assays. The total protein concentrations of the enzyme samples were determined by the Bradford method [64].

Both chromogenic substrate 5-bromo-4-chloro-3-indolyl-β-D-glucuronic acid (X-gluc) and fluorogenic substrate 4-methylumbelliferyl-β-D-glucuronic acid (MUG) were used to determine GusA activity. For the X-gluc assay, 20 μL of the enzyme samples were mixed with 1 mL of X-gluc assay buffer (GusA Buffer containing 0.086 mM X-gluc) [65], and incubated at 37°C for 2 h until a blue color was observed. When MUG was used as the substrate, the reaction mixture of 0.2 mL diluted enzyme sample and 1.8 mL MUG assay buffer (GusA Buffer containing 4 mM MUG) pre-warmed at 37°C was loaded into a quartz fluorometer cuvette (light path = 1 cm) after adequate mixing, and the fluorescence intensity was measured using a fluorescence spectrophotometer (F-4600, Hitachi Limited, Tokyo, Japan) at 37°C. The fluorescence kinetic curve was recorded with a time-scan mode (Ex = 365 nm, Em = 455 nm, PMT voltage = 700 V) every 30 s for 10 min. The curve slope value and protein concentration of a sample was used to calculate the GusA activity (U/mg) as described [20].

Mutant screening and plasmid curing

The disruption of mspI and cipC genes in C. cellulolyticum H10ΔpyrF using targetron plasmids was performed according to a modified protocol [11]. Transformants containing plasmid pARA-PyrF-mspI or pARA-PyrF-cipC (Table 1) were inoculated and cultivated in liquid GS-2 medium without erythromycin for 24 h. Then, the cultures were supplemented with 0 to 10 g/L L-arabinose as an inducer at 34°C for another 0 to 4 h. The resulting cultures were washed twice with fresh GS-2 medium, and then plated on solid GS-2 medium supplemented with FOA for plasmid curing based on the reported pyrF-based screening system [11]. The plasmid-cured strains were verified if no growth was observed with the presence of erythromycin. The mspI- and cipC-disrupted mutants were finally confirmed by colony PCR using primer sets Ccel2866-F/R or Ccel0728-F/R (Additional file 5) and sequencing (Sangon, Shanghai, China).

Southern hybridization

Southern blotting was performed to identify intron insertion in the genomic DNA of C. cellulolyticum mutants as described previously [56]. All positive colonies confirmed by PCR and sequencing were inoculated and cultivated in fresh liquid GS-2 medium until late-log phase. Then 4 mL cultures were centrifuged to obtain cell pellets for C. cellulolyticum genomic DNA isolation using a TIANamp Bacteria DNA Extraction Kit (Tiangen Biotech, Beijing, China). Genomic DNA was digested with EcoRI and BamHI at 37°C overnight, purified using a traditional phenol/chloroform extraction and ethanol precipitation method, separated by 0.8% agarose gel electrophoresis, and finally transferred to a Nylon membrane (Hybond-NX, GE Healthcare, Pewaukee, WI, USA). The intron probe was amplified using primer set Probe-F/R (Additional file 5) and labeled with digoxigenin-11-dUTP. Hybridization and immunological detection were performed according to the manufacturer’s instructions (DIG-High Prime DNA Labeling and Detection Starter Kit I; Roche, Basel, Switzerland).

Fermentation analysis

Batch fermentation of C. cellulolyticum strains was performed anaerobically in GS-2 medium at 34°C in 250-mL serum bottles with 100 mL medium containing various sugars (L-arabinose, D-xylose, D-glucose, cellobiose) or sugar combinations as carbon sources. Two microliters of broth was sampled every 6 or 12 h during cultivation to analyze the optical density at 600 nm (OD600) using a UV-vis spectrophotometer. The supernatants of the samples were obtained by centrifugation and micro-filtration (0.22-μm pore diameter) and were used to quantify the residual sugars directly using high performance liquid chromatography (HPLC) (Rigol L-3000, Rigol Technologies, Oakwood Village, OH, USA) equipped with an Aminex HPX-87H column (Bio-Rad, Hercules, CA, USA) and a refractive index detector (Agilent 1260 infinity RID; Agilent, Santa Clara, CA, USA). Furthermore, 5 mM H2SO4 was used as the mobile phase at 55°C with a flow rate of 0.5 mL/min [12].

Abbreviations

ARAi:

arabinose-inducible genetic operation system

CBP:

consolidated bioprocessing

CCR:

carbon catabolize repression

FOA:

5-fluoroorotic acid

GusA:

β-glucuronidase

HPLC:

high performance liquid chromatography

IEP:

intron-encoded protein

IPTG:

isopropyl-β-d-thiogalactoside

LB:

Luria-Bertani

MUG:

4-methylumbelliferyl-β-D-glucuronic acid

OD600 :

optical density at 600 nm

PpFbFPm:

oxygen-independent fluorescent protein from Pseudomonas putida

ptk :

phosphoketolase gene

thl :

thiolase gene

X-gluc:

5-bromo-4-chloro-3-indolyl-β-D-glucuronic acid

References

  1. Demain AL. Biosolutions to the energy problem. J Ind Microbiol Biotechnol. 2009;36:319–32.

    Article  CAS  Google Scholar 

  2. Antoni D, Zverlov VV, Schwarz WH. Biofuels from microbes. Appl Microbiol Biotechnol. 2007;77:23–35.

    Article  CAS  Google Scholar 

  3. Gronenberg LS, Marcheschi RJ, Liao JC. Next generation biofuel engineering in prokaryotes. Curr Opin Chem Biol. 2013;17:462–71.

    Article  CAS  Google Scholar 

  4. Hoffert MI. Farewell to fossil fuels? Science. 2010;329:1292–4.

    Article  CAS  Google Scholar 

  5. Hasunuma T, Okazaki F, Okai N, Hara KY, Ishii J, Kondo A. A review of enzymes and microbes for lignocellulosic biorefinery and the possibility of their application to consolidated bioprocessing technology. Bioresour Technol. 2013;135:513–22.

    Article  CAS  Google Scholar 

  6. Olson DG, McBride JE, Shaw AJ, Lynd LR. Recent progress in consolidated bioprocessing. Curr Opin Biotechnol. 2012;23:396–405.

    Article  CAS  Google Scholar 

  7. Xu Q, Singh A, Himmel ME. Perspectives and new directions for the production of bioethanol using consolidated bioprocessing of lignocellulose. Curr Opin Biotechnol. 2009;20:364–71.

    Article  CAS  Google Scholar 

  8. Lynd LR, van Zyl WH, McBride JE, Laser M. Consolidated bioprocessing of cellulosic biomass: an update. Curr Opin Biotechnol. 2005;16:577–83.

    Article  CAS  Google Scholar 

  9. Tracy BP, Jones SW, Fast AG, Indurthi DC, Papoutsakis ET. Clostridia: the importance of their exceptional substrate and metabolite diversity for biofuel and biorefinery applications. Curr Opin Biotechnol. 2012;23:364–81.

    Article  CAS  Google Scholar 

  10. Demain AL, Newcomb M, Wu JH. Cellulase, clostridia, and ethanol. Microbiol Mol Biol Rev. 2005;69:124–54.

    Article  CAS  Google Scholar 

  11. Cui GZ, Zhang J, Hong W, Xu C, Feng Y, Cui Q, et al. Improvement of ClosTron for successive gene disruption in Clostridium cellulolyticum using a pyrF-based screening system. Appl Microbiol Biotechnol. 2014;98:313–23.

    Article  CAS  Google Scholar 

  12. Mohr G, Hong W, Zhang J, Cui G-Z, Yang Y, Cui Q, et al. A targetron system for gene targeting in thermophiles and its application in Clostridium thermocellum. PLoS One. 2013;8:e69032.

    Article  CAS  Google Scholar 

  13. Guedon E, Desvaux M, Petitdemange H. Improvement of cellulolytic properties of Clostridium cellulolyticum by metabolic engineering. Appl Environ Microbiol. 2002;68:53–8.

    Article  CAS  Google Scholar 

  14. Cui GZ, Hong W, Zhang J, Li WL, Feng Y, Liu YJ, et al. Targeted gene engineering in Clostridium cellulolyticum H10 without methylation. J Microbiol Methods. 2012;89:201–8.

    Article  CAS  Google Scholar 

  15. Olson DG, Giannone RJ, Hettich RL, Lynd LR. Role of the CipA scaffoldin protein in cellulose solubilization, as determined by targeted gene deletion and complementation in Clostridium thermocellum. J Bacteriol. 2013;195:733–9.

    Article  CAS  Google Scholar 

  16. Harris LM, Welker NE, Papoutsakis ET. Northern, morphological, and fermentation analysis of spo0A inactivation and overexpression in Clostridium acetobutylicum ATCC 824. J Bacteriol. 2002;184:3586–97.

    Article  CAS  Google Scholar 

  17. Li H, Liao JC. A synthetic anhydrotetracycline-controllable gene expression system in Ralstonia eutropha H16. ACS Synthetic Biol. 2014. in press.

  18. Banerjee A, Leang C, Ueki T, Nevin KP, Lovley DR. Lactose-inducible system for metabolic engineering of Clostridium ljungdahlii. Appl Environ Microbiol. 2014;80:2410–6.

    Article  Google Scholar 

  19. Al-Hinai MA, Fast AG, Papoutsakis ET. Novel system for efficient isolation of Clostridium double-crossover allelic exchange mutants enabling markerless chromosomal gene deletions and DNA integration. Appl Environ Microbiol. 2012;78:8112–21.

    Article  CAS  Google Scholar 

  20. Dong H, Tao W, Zhang Y, Li Y. Development of an anhydrotetracycline-inducible gene expression system for solvent-producing Clostridium acetobutylicum: a useful tool for strain engineering. Metab Eng. 2012;14:59–67.

    Article  CAS  Google Scholar 

  21. Heap JT, Pennington OJ, Cartman ST, Carter GP, Minton NP. The ClosTron: a universal gene knock-out system for the genus Clostridium. J Microbiol Methods. 2007;70:452–64.

    Article  CAS  Google Scholar 

  22. Karberg M, Guo H, Zhong J, Coon R, Perutka J, Lambowitz AM. Group II introns as controllable gene targeting vectors for genetic manipulation of bacteria. Nat Biotechnol. 2001;19:1162–7.

    Article  CAS  Google Scholar 

  23. Lambowitz AM, Zimmerly S. Group II Introns: mobile ribozymes that invade DNA. Cold Spring Harb Perspect Biol. 2011;3:a003616.

    Article  Google Scholar 

  24. Chen Y, McClane BA, Fisher DJ, Rood JI, Gupta P. Construction of an alpha toxin gene knockout mutant of Clostridium perfringens type A by use of a mobile group II intron. Appl Environ Microbiol. 2005;71:7542–7.

    Article  CAS  Google Scholar 

  25. Shao L, Hu S, Yang Y, Gu Y, Chen J, Jiang W, et al. Targeted gene disruption by use of a group II intron (targetron) vector in Clostridium acetobutylicum. Cell Res. 2007;17:963–5.

    Article  CAS  Google Scholar 

  26. Heap JT, Kuehne SA, Ehsaan M, Cartman ST, Cooksley CM, Scott JC, et al. The ClosTron: mutagenesis in Clostridium refined and streamlined. J Microbiol Methods. 2010;80:49–55.

    Article  CAS  Google Scholar 

  27. Cai G, Jin B, Saint C, Monis P. Genetic manipulation of butyrate formation pathways in Clostridium butyricum. J Biotech. 2011;155:269–74.

    Article  CAS  Google Scholar 

  28. Li Y, Tschaplinski TJ, Engle NL, Hamilton CY, Rodriguez Jr M, Liao JC, et al. Combined inactivation of the Clostridium cellulolyticum lactate and malate dehydrogenase genes substantially increases ethanol yield from cellulose and switchgrass fermentations. Biotechnol Biofuels. 2012;5:2.

    Article  CAS  Google Scholar 

  29. Cooksley CM, Zhang Y, Wang H, Redl S, Winzer K, Minton NP. Targeted mutagenesis of the Clostridium acetobutylicum acetone-butanol-ethanol fermentation pathway. Metab Eng. 2012;14:630–41.

    Article  CAS  Google Scholar 

  30. Matsuura M, Saldanha R, Ma HW, Wank H, Yang J, Mohr G, et al. A bacterial group II intron encoding reverse transcriptase, maturase, DNA endonuclease activities: biochemical demonstration of maturase activity and insertion of new genetic information within the intron. Genes Dev. 1997;11:2910–24.

    Article  CAS  Google Scholar 

  31. Mohr G, Smith D, Belfort M, Lambowitz AM. Rules for DNA target-site recognition by a lactococcal group II intron enable retargeting of the intron to specific DNA sequences. Genes Dev. 2000;14:559–73.

    CAS  Google Scholar 

  32. Wang T, Ma X, Du G, Chen J. Overview of regulatory strategies and molecular elements in metabolic engineering of bacteria. Mol Biotechnol. 2012;52:300–8.

    Article  CAS  Google Scholar 

  33. Guzman LM, Belin D, Carson MJ, Beckwith J. Tight regulation, modulation, and high-level expression by vectors containing the arabinose P-BAD promoter. J Bacteriol. 1995;177:4121–30.

    CAS  Google Scholar 

  34. Bertram R, Hillen W. The application of Tet repressor in prokaryotic gene regulation and expression. Microbial Biotechnol. 2008;1:2–16.

    CAS  Google Scholar 

  35. Jensen PR, Westerhoff HV, Michelsen O. The use of lac-type promoters in control analysis. Eur J Biochem. 1993;211:181–91.

    Article  CAS  Google Scholar 

  36. Pan SH, Malcolm BA. Reduced background expression and improved plasmid stability with pET vectors in BL21 (DE3). BioTechniques. 2000;29:1234–8.

    CAS  Google Scholar 

  37. Studier FW, Rosenberg AH, Dunn JJ, Dubendorff JW. Use of T7 RNA polymerase to direct expression of cloned genes. Methods Enzymol. 1990;185:60–89.

    Article  CAS  Google Scholar 

  38. Hartman AH, Liu H, Melville SB. Construction and characterization of a lactose-inducible promoter system for controlled gene expression in Clostridium perfringens. Appl Environ Microbiol. 2011;77:471–8.

    Article  CAS  Google Scholar 

  39. Pyne ME, Bruder M, Moo-Young M, Chung DA, Chou CP. Technical guide for genetic advancement of underdeveloped and intractable Clostridium. Biotechnol Adv. 2014;32:623–41.

    Article  CAS  Google Scholar 

  40. Nuyts S, Van Mellaert L, Theys J, Landuyt W, Bosmans E, Anne J, et al. Radio-responsive recA promoter significantly increases TNFalpha production in recombinant clostridia after 2 Gy irradiation. Gene Ther. 2001;8:1197–201.

    Article  CAS  Google Scholar 

  41. Girbal L, Mortier-Barriere I, Raynaud F, Rouanet C, Croux C, Soucaille P. Development of a sensitive gene expression reporter system and an inducible promoter-repressor system for Clostridium acetobutylicum. Appl Environ Microbiol. 2003;69:4985–8.

    Article  CAS  Google Scholar 

  42. Nariya H, Miyata S, Kuwahara T, Okabe A. Development and characterization of a xylose-inducible gene expression system for Clostridium perfringens. Appl Environ Microbiol. 2011;77:8439–41.

    Article  CAS  Google Scholar 

  43. Newman JR, Fuqua C. Broad-host-range expression vectors that carry the L-arabinose-inducible Escherichia coli araBAD promoter and the araC regulator. Gene. 1999;227:197–203.

    Article  CAS  Google Scholar 

  44. Sukchawalit R, Vattanaviboon P, Sallabhan R, Mongkolsuk S. Construction and characterization of regulated L-arabinose-inducible broad host range expression vectors in Xanthomonas. FEMS Microbiol Lett. 1999;181:217–23.

    CAS  Google Scholar 

  45. Carroll P, Brown AC, Hartridge AR, Parish T. Expression of Mycobacterium tuberculosis Rv1991c using an arabinose-inducible promoter demonstrates its role as a toxin. FEMS Microbiol Lett. 2007;274:73–82.

    Article  CAS  Google Scholar 

  46. Zhang Y, Shang X, Lai S, Zhang G, Liang Y, Wen T. Development and application of an arabinose-inducible expression system by facilitating inducer uptake in Corynebacterium glutamicum. Appl Environ Microbiol. 2012;78:5831–8.

    Article  CAS  Google Scholar 

  47. Zhang L, Leyn SA, Gu Y, Jiang W, Rodionov DA, Yang C. Ribulokinase and transcriptional regulation of arabinose metabolism in Clostridium acetobutylicum. J Bacteriol. 2012;194:1055–64.

    Article  CAS  Google Scholar 

  48. Servinsky MD, Kiel JT, Dupuy NF, Sund CJ. Transcriptional analysis of differential carbohydrate utilization by Clostridium acetobutylicum. Microbiology. 2010;156:3478–91.

    Article  CAS  Google Scholar 

  49. Sa-Nogueira I, Mota LJ. Negative regulation of L-arabinose metabolism in Bacillus subtilis: characterization of the araR (araC) gene. J Bacteriol. 1997;179:1598–608.

    CAS  Google Scholar 

  50. Yamaguchi Y, Inouye M. mRNA interferases, sequence-specific endoribonucleases from the toxin-antitoxin systems. Prog Mol Biol Transl Sci. 2009;85:467–500.

    Article  CAS  Google Scholar 

  51. Yang J, Jiang W, Yang S. mazF as a counter-selectable marker for unmarked genetic modification of Pichia pastoris. FEMS Yeast Res. 2009;9:600–9.

    Article  CAS  Google Scholar 

  52. Conrad B, Savchenko RS, Breves R, Hofemeister J. A T7 promoter-specific, inducible protein expression system for Bacillus subtilis. Mol Gen Genet. 1996;250:230–6.

    CAS  Google Scholar 

  53. Suzuki H, Murakami A, Yoshida K. Counterselection system for Geobacillus kaustophilus HTA426 through disruption of pyrF and pyrR. Appl Environ Microbiol. 2012;78:7376–83.

    Article  CAS  Google Scholar 

  54. Cartman ST, Kelly ML, Heeg D, Heap JT, Minton NP. Precise manipulation of the Clostridium difficile chromosome reveals a lack of association between the tcdC genotype and toxin production. Appl Environ Microbiol. 2012;78:4683–90.

    Article  CAS  Google Scholar 

  55. Jia K, Zhu Y, Zhang Y, Li Y. Group II intron-anchored gene deletion in Clostridium. PLoS One. 2011;6:e16693.

    Article  CAS  Google Scholar 

  56. Hong W, Zhang J, Feng Y, Mohr G, Lambowitz AM, Cui G-Z, et al. The contribution of cellulosomal scaffoldins to cellulose hydrolysis by Clostridium thermocellum analyzed by using thermotargetrons. Biotechnol Biofuels. 2014;7:80.

    Article  Google Scholar 

  57. Doi RH, Kosugi A, Murashima K, Tamaru Y, Han SO. Cellulosomes from mesophilic bacteria. J Bacteriol. 2003;185:5907–14.

    Article  CAS  Google Scholar 

  58. Xiao H, Gu Y, Ning Y, Yang Y, Mitchell WJ, Jiang W, et al. Confirmation and elimination of xylose-metabolic bottlenecks in glucose-PTS-deficient Clostridium acetobutylicum to realize simultaneous utilization of glucose, xylose and arabinose. Appl Environ Microbiol. 2011;77:7886–95.

    Article  CAS  Google Scholar 

  59. Goerke B, Stulke J. Carbon catabolite repression in bacteria: many ways to make the most out of nutrients. Nat Rev Microbiol. 2008;6:613–24.

    Article  CAS  Google Scholar 

  60. Deutscher J. The mechanisms of carbon catabolite repression in bacteria. Curr Opin Microbiol. 2008;11:87–93.

    Article  CAS  Google Scholar 

  61. Abdou L, Boileau C, de Philip P, Pages S, Fierobe HP, Tardif C. Transcriptional regulation of the Clostridium cellulolyticum cip-cel operon: a complex mechanism involving a catabolite-responsive element. J Bacteriol. 2008;190:1499–506.

    Article  CAS  Google Scholar 

  62. Gu Y, Ding Y, Ren C, Sun Z, Rodionov DA, Zhang W, et al. Reconstruction of xylose utilization pathway and regulons in Firmicutes. BMC Genomics. 2010;11:255.

    Article  Google Scholar 

  63. Drepper T, Eggert T, Circolone F, Heck A, Krauss U, Guterl JK, et al. Reporter proteins for in vivo fluorescence without oxygen. Nat Biotechnol. 2007;25:443–5.

    Article  CAS  Google Scholar 

  64. Bradford MM. A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding. Anal Biochem. 1976;72:248–54.

    Article  CAS  Google Scholar 

  65. Jefferson RA, Burgess SM, Hirsh D. β-Glucuronidase from Escherichia coli as a gene-fusion marker. Proc Natl Acad Sci U S A. 1986;83:8447–51.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

We thank Prof. Yin Li and Dr. Hongjun Dong from Institute of Microbiology, CAS for providing the plasmid pGusA2-2tetO1. We thank Prof. Yingang Feng for critically reading the manuscript. This work was supported by the National Basic Research Program of China (grant 2011CB707404) to QC; the National Natural Science Foundation of China (grant 31300035) and Qingdao Science and Technology Development Plan (grant 13-1-4-196-jch) to YJL; and China Postdoctoral Science Foundation to GZC.

Author information

Authors and Affiliations

  1. Shandong Provincial Key Laboratory of Energy Genetics, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, 189, Songling Road, Qingdao, 266101, People’s Republic of China

    Jie Zhang, Ya-Jun Liu, Gu-Zhen Cui & Qiu Cui

  2. Key Laboratory of Biofuels, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, 189, Songling Road, Qingdao, 266101, People’s Republic of China

    Qiu Cui

  3. Qingdao Engineering Laboratory of Single Cell Oil, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, 189, Songling Road, Qingdao, 266101, People’s Republic of China

    Jie Zhang, Ya-Jun Liu, Gu-Zhen Cui & Qiu Cui

  4. University of Chinese Academy of Sciences, Chinese Academy of Sciences, 19, Yuquan Road, Beijing, 100049, People’s Republic of China

    Jie Zhang

Authors
  1. Jie Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ya-Jun Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Gu-Zhen Cui
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Qiu Cui
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to Ya-Jun Liu or Qiu Cui.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

JZ, YJL, and QC designed the research; JZ and GZC performed experiments; JZ and YJL analyzed data and wrote the paper. All authors have read and approved of the final version of the manuscript.

Additional files

Additional file 1:

Schematic representation of the plasmids constructed for the arabinose-inducible genetic operation (ARAi) system. (A) plasmids constructed for inducible gene expression and the counterselection marker; (B) plasmids constructed for the inducible ClosTron system. All plasmids contained an ampicillin resistance gene (amp R) and an erythromycin resistance gene (mls R). Green dashed boxes indicated the inducible promoter system containing a P ptk promoter and an AraR expression cassette from C. acetobutylicum.

Additional file 2:

Investigation of inducing activity of the ARAi system in C . cellulolyticum H10 in company with L-arabinose consumption. H10::pARA-GusA was firstly cultivated with 5 g/L cellobiose for 24 h and 1 g/L L-arabinose was added to induce the expression of GusA. Interval sampling was performed after induction for 2, 6, 12, 24, 48, and 72 h, and GusA activity (Black bars) and the concentration of residual L-arabinose (Green line) and cellobiose (Blue line) were then determined. Two independent setups were prepared and measured for every time point.

Additional file 3:

PCR confirmation of C . cellulolyticum H10 mutant strains. The transformants of H10ΔpyrF containing pARA-PyrF-mspI or pARA-PyrF-cipC were cultivated in liquid GS-2 medium without antibiotic and induced with L-arabinose for 4 h. After plasmid curing via FOA screening, 48 colonies of each recombinant strain were selected as templates for PCR with primer sets Ccel2866-F/R or Ccel0728-F/R, respectively. Arrows indicated the PCR products (~1.3 kb) with the full-length intron sequence. The bands of approximately 0.4 or 0.3 kb indicate the PCR products of wild-type strain. For H10ΔpyrF::pARA-PyrF-mspI, 3 of 48 colonies were confirmed as mutant H10ΔpyrFΔmspI (A); for H10ΔpyrF::pARA-PyrF-cipC, 6 of 48 colonies were confirmed as mutant H10ΔpyrFΔcipC (B). M, DNA marker (from top to bottom, 5,000, 3,000, 2,000, 1,500, 1,000, 800, 500, and 300 bp).

Additional file 4:

Southern hybridization analysis of C . cellulolyticum H10 mutant strains. H10ΔpyrF was used as a negative control (NC). The inducible ClosTron was employed to construct H10ΔpyrFΔmspI (lane 2-4) and H10ΔpyrFΔcipC (lane 6-8). Two to six colonies verified as mutants by colony PCR (Additional file 3) were analyzed by southern blotting. The L-arabinose induction was performed for 0 h (lane 2,6), 2 h (lane 3,7) or 4 h (lane 4,8). H10::MspI297s (lane 1) and H10ΔpyrF::CipC117a (lane 5) constructed by the reported ClosTron method [1] were also analyzed in parallel. Black triangles indicate the additional off-target insertions.

Additional file 5:

Primers used in this study.

Rights and permissions

Open Access  This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.

The Creative Commons Public Domain Dedication waiver (https://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, J., Liu, YJ., Cui, GZ. et al. A novel arabinose-inducible genetic operation system developed for Clostridium cellulolyticum . Biotechnol Biofuels 8, 36 (2015). https://doi.org/10.1186/s13068-015-0214-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s13068-015-0214-2

Keywords

Biotechnology for Biofuels and Bioproducts

ISSN: 2731-3654

Contact us