Skip to main content

Systematic and evolutionary engineering of a xylose isomerase-based pathway in Saccharomyces cerevisiae for efficient conversion yields

Abstract

Background

Efficient xylose fermentation by yeast would improve the economical and sustainable nature of biofuels production from lignocellulosic biomass. However, the efficiency of xylose fermentation by the yeast Saccharomyces cerevisiae is suboptimal, especially in conversion yield, despite decades of research. Here, we present an improved performance of S. cerevisiae in xylose fermentation through systematic and evolutionary engineering approaches.

Results

The engineering of S. cerevisiae harboring xylose isomerase-based pathway significantly improved the xylose fermentation performance without the need for intensive downstream pathway engineering. This strain contained two integrated copies of a mutant xylose isomerase, gre3 and pho13 deletion and XKS1 and S. stipitis tal1 overexpression. This strain was subjected to rapid adaptive evolution to yield the final, evolved strain (SXA-R2P-E) which could efficiently convert xylose to ethanol with a yield of 0.45 g ethanol/g xylose, the highest yield reported to date. The xylose consumption and ethanol production rates, 0.98 g xylose g cell−1 h−1 and 0.44 g ethanol g cell−1 h−1, respectively, were also among the highest reported. During this process, the positive effect of a pho13 deletion was identified for a xylose isomerase-containing strain and resulted in up to an 8.2-fold increase in aerobic growth rate on xylose. Moreover, these results demonstrated that low inoculum size and the cell transfer at exponential phase was found to be the most effective adaptation strategy during a batch culture adaptation process.

Conclusions

These results suggest that the xylose isomerase pathway should be the pathway of choice for efficient xylose fermentation in S. cerevisiae as it can outperform strains with the oxidoreductase pathway in terms of yield and ethanol production and xylose consumption rates. Consequently, the strain developed in this study could significantly improve the prospect of biofuels production from lignocellulosic biomass.

Background

Lignocellulosic biomass can provide a sustainable feedstock for biofuels production. However, the inefficient fermentation of constituent pentose sugars such as xylose and arabinose limit the industrial-scale conversion of lignocellulose by the yeast Saccharomyces cerevisiae[1],[2]. Several metabolic deficiencies in this yeast, including the lack of an endogenous pathway for xylose catabolism, require metabolic engineering. Many efforts have been reported that introduce heterologous xylose catabolism, such as the oxidoreductase pathway from Scheffersomyces stipitis (encoded by xyl1, xyl2, and xyl3) and isomerase pathway from Piromyces sp., (encoded by xylA) [3],[4]. While initial incorporation of these heterologous xylose catabolic pathways enable S. cerevisiae to convert xylose to ethanol, complementation is not enough and strains suffer from either low ethanol yield or productivity (or both) and thus require further improvement in xylose fermentation [2]. As a result, significant efforts have been made in modifying heterologous enzymes [5]-[7], optimizing metabolic flux through gene overexpression [8]-[11] or deletion [12]-[14], evolving xylose-utilizing strains by evolutionary engineering [15]-[18], and identifying improved xylose transporter proteins [19]-[21].

As examples of additional strain engineering, the overexpression of xylulokinase [9] and downstream genes involved in pentose phosphate pathway [11], and the deletion of gre3[14] or pho13[13],[22] genes have been shown to significantly improve xylose utilization rates and efficiencies through reduced xylitol formation. Individual enzyme modifications to alter cofactor preference of xylose reductase and xylitol dehydrogenase [6],[7], or improving enzyme activity of xylose isomerase by directed evolution [5], have improved heterologous xylose catabolism performance. Furthermore, whole-cell evolutionary engineering has been routinely applied to these rationally engineered strains to boost xylose fermentation efficiency [16]-[18]. Despite this array of attempts, the efficiency (especially yield) of xylose fermentation still remains suboptimal to achieve the goal of economical and sustainable biofuel production from lignocellulosic biomass, especially when compared with glucose conversion.

Until recently, the oxidoreductase pathway has been more intensely studied since consumption and growth rates with the xylose isomerase pathway have been extremely low [4]. However, the isomerase pathway does not require extensive cofactors as in the oxidoreductase pathway and thus has higher potential in terms of theoretical yield (0.51 g ethanol/g xylose) [5]. Toward this end, the experimental ethanol yields reported for the oxidoreductase pathway range from 0.09 to 0.39 for optimized strains [23],[24], whereas reports as high as 0.43 g ethanol/g xylose can be found for the isomerase pathway [16],[25]. Therefore, there is considerable interest in improving a xylose isomerase-based pathway in S. cerevisiae with a particular focus on improving both xylose consumption rates and yields [5],[16],[26].

Recently, our group subjected the xylose isomerase enzyme, xylA from Piromyces sp., to directed evolution [5]. In doing so, a xylose isomerase mutant was identified that improved aerobic growth rate by 61-fold and both ethanol production and xylose consumption rates by 8-fold. These results were obtained with a minimally engineered strain of S. cerevisiae and achieved rates that were comparable with the oxidoreductase pathway. Here, we further improve xylose-isomerase based catabolism of xylose in S. cerevisiae by using a combination of rational and evolutionary engineering in a rapid fashion. As a rational engineering approach, we integrated two copies of the xylose isomerase mutant gene (xylA3*) into the genome of S. cerevisiae along with genomic overexpressions of native xylulokinase (XKS1) and heterologous transaldolase (tal1) from S. stipitis. We demonstrated that the deletion of pho13 can significantly improve the cell growth on xylose using the isomerase pathway only in high-flux strains. Following this rational engineering, we subjected this strain to a rapid adaptation and obtained an evolved strain with the highest ethanol yield from xylose reported to date, coupled with the second highest ethanol production and xylose consumption rates reported.

Results

Rational construction of xylose isomerase-based strains

In this study, we sought to develop a S. cerevisiae strain with improved xylose catabolic rates and yields using the xylose isomerase pathway. To this end, we first established a genomic integration of the xylose isomerase pathway in S. cerevisiae by expressing a mutant xylose isomerase, xylA3*, developed by our group [5]. In our prior work, episomal expression of xylA3* combined with overexpression of the native XKS1 and tal1 from S. stipitis resulted in improved growth rates and xylose consumption rates [5]. To achieve efficient xylose utilization, we first integrated xylA3* into the genome of a S. cerevisiae BY4741 gre3 knockout strain overexpressing XKS1, which was named as SXA-R1. In order to achieve catabolic levels commensurate with our previous plasmid-borne strain, an additional copy of xylA3* and tal1 from S. stipitis were integrated into SXA-R1 generating SXA-R2 (Table 1).

Table 1 Saccharomyces cerevisiae strains used in this study

The effect of pho13 deletion with a xylose isomerase pathway

In an effort to further improve xylose consumption rates, we evaluated the impact of a pho13 deletion on the xylose isomerase pathway. The pho13 deletion has been reported to improve xylose fermentation and tolerance to toxic chemicals in lignocellulosic hydrolysate [12],[13],[27],[28]. However, the improvement conferred by this deletion was mostly seen in strains harboring an oxidoreductase pathway with only marginally exhibited improvement with xylose isomerase-based strains [13]. We hypothesized that the improvement of a pho13 deletion could have been muted in prior xylose isomerase strains due to low catabolic rates. Therefore, we investigated the effect of deleting pho13 in strains harboring the mutant xylose isomerase pathways, which have higher xylose catabolic rates compared to wild-type xylose isomerase [5].

Here, the effect of pho13 deletion was investigated in strains expressing different levels of xylose isomerase (thus conferring different levels of cell growth). To this end, we deleted the pho13 gene in the rationally engineered strains of SXA-R1 and SXA-R2 described above to make strains SXA-R1P and SXA-R2P, respectively. By deleting pho13, both rationally engineered strains showed significant increases in cell growth on xylose (Figure 1). As suspected, the impact of the pho13 deletion was more pronounced in strains with a higher expression of xylose isomerase. Specifically, the pho13 deletion increased aerobic growth rates 2.5-fold and 8.2-fold in SXA1-R1P and SXA-R2P respectively, compared to their respective controls. This result suggests that the beneficial effect of the pho13 deletion is only clear when xylose isomerase expression is sufficiently high. This result could explain prior reports of pho13 deletion being insignificant in xylose isomerase strains [29] supporting the importance of coupling high xylose isomerase pathway flux with a pho13 deletion.

Figure 1
figure 1

Rational engineering of S. cerevisiae expressing a xylose isomerase pathway. Rational strain engineering in a gre3 background containing an integrated copy of xylA 3* and XKS1 overexpression (SXA-R1 strain) was evaluated. In addition, the expression of an additional copy of xylA3* and tal1 overexpression (square), and pho13 deletion (black) gradually improved the cell growth on xylose. Strain identifications (SXA-R1: white circle, SXA-R2: white square, SXA-R1P: black circle, and SXA-R2P: black square) are described in the text. The expression of an additional copy of xylA3* and pho13 deletion showed synergistic effect on the cell growth on xylose. Error bars represent the standard deviation of biological triplicates.

Evolutionary engineering of the rationally engineered xylose-utilizing strain

Upon developing the rationally engineered strain SXA-R2P containing two copies of xylA3*, gre3 and pho13 deletions, and overexpression of XKS1 and tal1, we sought to further improve xylose catabolism in this strain by evolutionary engineering. Despite the effectiveness and simplicity of evolutionary engineering to improve desired phenotypes, there are no standardized methods for an effective adaptation process. To this end, we sought to evolve the rationally engineered strain SXA-R2P using serial subculturing in xylose medium and evaluate the success rate using different inoculum sizes and different cell growth phases. The inoculum sizes used in this study were 0.5, 1, and 5% and cell transfers into fresh medium were conducted when the cell growth was at exponential and stationary phases.

During the rapid 24-day adaptation process investigated here, cultures were transferred 12 times in the case of the exponential phase transfer set and five times in the case of the stationary phase transfer set. Overall adaptation rate was determined on the basis of growth rate advantage. As adaptation progressed, the cell growth rate on xylose increased progressively for the exponential phase transfer set. Most specifically, the most significant increase in the cell growth was observed from the set using low inoculum size. In contrast, the cultures from the stationary phase transfer set showed no significant growth adaptation, and the differences among various inoculum sizes were negligible. These data suggest that the choice of cell growth phase plays a significant role in obtaining growth advantage in batch culture adaptation as well as defining success for an evolutionary engineering experiment. Following this adaptation process, 130 evolved strains from the exponential phase transfer set were isolated and tested for growth on xylose by using Bioscreen C for high throughput analysis. The cell growth of 20 representative strains from each inoculum sizes are shown in Figure 2. The isolated strains from the pool with the low inoculum size (0.5%) showed highest improvement in the growth rates on xylose compared to those from the medium and high inoculum sizes (1% and 5%, respectively). As inoculum size increased, the efficiency in adaptation decreased, thus demonstrating the importance of this parameter in defining success for an evolutionary engineering experiment. Of these improved xylose-utilizing strains, the isolate showing the highest growth on xylose was selected as the evolved strain and designated as SXA-R2P-E. When evaluated in 14 ml culture tubes, SXA-R2P-E showed an aerobic growth rate of 0.128 h−1, which was 22% higher than that of the initial strain, SXA-R2P (0.105 h−1; Additional file 1: Figure S1). This growth rate is among the highest reported for a xylose isomerase-based strain.

Figure 2
figure 2

Adaptive evolution of the rationally engineered strain expressing the xylose isomerase pathway. The adaptive evolution of the rationally engineered strain (SXA-R2P) was performed in the exponential cell growth phase transfer set with different inoculum sizes of low (0.5%: black), medium (1%: grey), and high (5%: white). The graph shows representative strains with improved cell growth on xylose. The strains adapted in the culture with low inoculum size showed the highest improvement in the cell growth.

Improved xylose fermentation in the evolved strain SXA-R2P-E

To quantify the improvement of xylose fermentation performance of the evolved strain SXA-R2P-E, we performed high-cell density (OD = 20) batch fermentations in the micro-aerobic condition afforded by culturing 40 ml in a 50 ml sealed vial. Ethanol production capacity was greatly enhanced in SXA-R2P-E compared to the initial strain of SXA-R2P and the control strain, which does not have a xylose catabolic pathway (Figure 3A). After 72 hours of fermentation, SXA-R2P-E produced nearly 8 g/L of ethanol from about 20 g/L of xylose representing near complete consumption of xylose in this same timeframe (Figure 3B). The ethanol production and xylose consumption rates for this evolved strain (0.054 ± 0.002 g ethanol g cell−1 h−1 and 0.141 ± 0.003 g xylose g cell−1 h−1) were 3.9-fold and 4.3-fold higher than those of the starting strain SXA-R2P (0.014 ± 0.002 g ethanol g cell−1 h−1 and 0.033 ± 0.003 g xylose g cell−1 h−1). These increases were accompanied by an almost 20% increase in yield of ethanol approaching 0.39 g ethanol/g xylose for the evolved strain (Table 2). These results suggest that the adaptation process successfully improved the xylose catabolism in the rationally engineered strain and resulted in a strain with highly efficient xylose catabolism.

Figure 3
figure 3

Micro-aerobic fermentation tests with the evolved strain. Ethanol production (A) and xylose consumption (B) profiles were measured in micro-aerobic conditions for wild-type (white), the rationally engineered strain (grey), and evolved strain (black) of S. cerevisiae. Ethanol production and xylose consumption were significantly increased in the evolved strain. Total improvement in both ethanol production and xylose consumption rates were about 4-fold. Error bars represent the standard deviation of biological triplicates.

Table 2 Comparison of representative previously reported xylose fermentation performances

To further improve the xylose fermentation performance and mimic more industrial-scale operation, we performed xylose fermentation in a bioreactor which offers more controlled fermentation conditions. The bioreactor was operated with no inlet airflow and minimal stirring to create an almost anaerobic condition after cells consumed all oxygen initially dissolved in the medium (typically around 12 hours as monitored by a dissolved oxygen sensor). Ethanol production from xylose was significantly improved under these conditions along with the xylose consumption rate (Figure 4). The ethanol production rate of SXA-R2P-E in the bioreactor reached 0.44 ± 0.01 g ethanol g cell−1 h−1, a value that is 8.1-fold higher than that obtained in the vial fermentation. The xylose consumption rate in the bioreactor also increased by 7.0-fold (0.98 g xylose g cell−1 h−1 versus 0.14 g xylose g cell−1 h−1 in the vial fermentation). Finally, these nearly anaerobic conditions and level of control resulted in a substantially increased ethanol yield of 0.45 g ethanol/g xylose, which is close to the theoretical yield value of 0.51 g/g [2]. Based on a survey of the literature, the xylose fermentation performance of SXA-R2P-E is the highest in terms of ethanol yield, and among the highest with respect to ethanol production and xylose consumption rates (Table 2).

Figure 4
figure 4

Anaerobic fermentation of xylose with the evolved strain of SXA-R2P-E. Ethanol production (black) and xylose concentration (white) profiles of the evolved strain were measured during anaerobic batch fermentation in a bioreactor. Error bars represent the standard deviation of technical duplicates.

Discussion

This study reports on the development of a superior strain for xylose conversion into ethanol on the basis of yield, as well as xylose catabolic rate. To accomplish this feat, we combined a minimal set of rational engineering targets with short-term evolutionary engineering. The resulting ethanol yield (0.45 g ethanol/g xylose) was the highest reported to date, and ethanol production and xylose consumption rates were also among the highest reported.

Furthermore, we confirmed the beneficial effect of pho13 deletion in a strain with a xylose isomerase pathway. In particular, we demonstrated that the pho13 deletion was only beneficial when xylose isomerase was expressed at sufficient levels. These results are in contrast to a prior report that investigated the effect of pho13 deletion in both a strain expressing an isomerase pathway (wild-type xylA gene), as well as a strain harboring the oxidoreductase pathway [29]. The beneficial effect of the pho13 deletion was clear in the strain expressing an oxidoreductase pathway, but not for the isomerase pathway strain. Due to the inefficiency of a wild-type isomerase pathway [5], it might have been hard to confirm the effect of pho13 deletion in this background. Here, we clearly demonstrate the beneficial effect of pho13 deletion with an improved xylose isomerase pathway, especially when xylose isomerase is highly expressed (Figure 1). The aerobic growth rate of SXA-R2P was 8.2-fold higher than that of SXA-R2, whereas SXA-R1P showed only 2.5-fold higher aerobic growth rate compared to SXA-R1.

A secondary aspect of this work is the comparison of conditions for evolutionary engineering. In particular, we confirmed that inoculum sizes and cell growth phases were important parameters influencing the success of a rapid strain evolution project. Evolutionary engineering is a powerful approach to improve strains for a desired phenotype [30]. For the case of biofuel production, evolutionary engineering has led to strains with improved tolerances to products and the utilization of substrates [16],[17],[29],[31]. However, the detailed information about effective adaptation processes is not available, nor are several conditions often compared. As a result, an adaptation process is usually conducted intuitively and takes a long period of time. In this study, we evaluated the effectiveness of rapid batch culture evolutionary engineering with respect to the conditions of inoculum sizes (low, medium, and high) and cell growth phases (exponential and stationary phases). Of the tested conditions, the most effective combination was the low inoculum size (0.5%) and exponential growth phase transfer - an easily understandable combination for rapid growth selection. In the end, the isolated strain showed an improved phenotype in a relatively short time frame of 24 days, and resulted in 4.3-fold increase in xylose consumption rate and 3.9-fold increase in ethanol production rate compared to the initial strain. It should be mentioned that we utilized a very rapid and effective method of evolutionary engineering. In contrast, for alternative work to improve S. cerevisiae expressing a xylose isomerase pathway, Kuyper et al. [17] and Zhou et al. [16] spent about 70 days and 160 days, respectively. Given the comparison between these strains (Table 2), it is evident that rapid evolutionary engineering combined with rational strain engineering can be quite effective for developing strains with improved xylose utilization.

This study presented a significantly improved xylose catabolism in S. cerevisiae. To our knowledge, the highest ethanol productivity and xylose consumption rates were reported by Zhou et al. [16] using a combinatorially engineered strain of wild-type xylose isomerase-expressing S. cerevisiae background with xyl3, TAL1, TKL1, RPE1, and RKI1 overexpression (Table 2). Following the engineering of xylose catabolism, auxotrophic markers were restored and additional nutrients were supplemented, and this led significant improvement in the xylose fermentation performance, giving this strain the highest rates. Without the nutrient complementation, however, the performance of the combinatorially engineered strain itself (0.40 g ethanol g cell−1 h−1 and 0.94 g xylose g cell−1 h−1, and 0.43 g ethanol/g xylose) falls behind the values reported in this study (0.44 g ethanol g cell−1 h−1 and 0.98 g xylose g cell−1 h−1, and 0.45 g ethanol/g xylose). As a result, it can be presumed that optimizing culture condition or complementing nutrient requirement in SXA-R2P-E could enhance the xylose fermentation performance further. As an example, by changing the initial cell concentration and controlling to a different pH, SXA-R2P-E can achieve an even higher xylose consumption rate of 1.33 g xylose g cell−1 h−1 (see Additional file 2: Figure S2). In addition, it is possible that further rational genetic changes, including overexpression of downstream pentose phosphate pathway enzymes, could further improve the ethanol production and xylose consumption rates.

Additional changes notwithstanding, the results achieved in this study clearly show that the xylose isomerase pathway has distinct functional and theoretical advantage over an oxidoreductase pathway for xylose fermentation in S. cerevisiae. The low ethanol productivity and xylose consumption rates that have been major challenges in the field are alleviated. In particular, the strain developed here outperforms evolved strains expressing oxidoreductase pathways in terms of ethanol productivity, xylose consumption rates, and yields (last three rows of Table 2). The results obtained in this study and representative data from previous similar studies (summarized in Table 2) show that the ethanol yields obtained with an isomerase pathway are in the range of 0.41 to 0.45 g ethanol/g xylose, whereas those with an oxidoreductase pathway were in the range of 0.31 to 0.39 g ethanol/g xylose. The ethanol production and xylose consumption rates were also higher for an isomerase pathway which were in the range of 0.40 to 0.77 g ethanol g cell−1 h−1 and 0.98 to 1.87 g xylose g cell−1 h−1, respectively, compared to those for an oxidoreductase pathway (0.25 to 0.32 g ethanol g cell−1 h−1 and 0.65 to 0.89 g xylose g cell−1 h−1, respectively). Collectively, these results suggest that the xylose isomerase pathway should be the pathway of choice for efficient xylose fermentation in S. cerevisiae.

Conclusions

This study presented a significantly improved xylose fermentation performance of S. cerevisiae expressing a xylose isomerase pathway along with minimal pathway engineering and evolutionary engineering. Without the need for extensive pathway engineering, the developed strain exhibits the highest ethanol yield (0.45 g ethanol g-1 xylose), and the second highest ethanol production and xylose consumption rates ever reported. During this process, the positive effect of pho13 deletion in a strain with the xylose isomerase pathway was clearly demonstrated. This experiment shows that the xylose isomerase-based pathway as developed here should be the pathway of choice over the oxidoreductase pathway for xylose utilization in S. cerevisiae.

Materials and methods

Strains and culture conditions

S. cerevisiae strains used in this are summarized in Table 1. Yeast strains were routinely propagated at 30°C in yeast synthetic complete (YSC) medium composed of 6.7 g/L yeast nitrogen base, 20 g/L glucose, and CSM-Leu-Trp-Ura, CSM-Leu-His-Ura, or CSM-His-Leu-Trp-Ura (MP Biomedicals, Solon, Ohio, United States). Growth characterizations and ethanol fermentation were conducted in an identical medium except that 20 g/L or 40 g/L xylose was added as a carbon source. Escherichia coli strain DH10β was used for all cloning and plasmid propagation (New England Biolabs, Ipswich, MA, United States). DH10β was grown at 37°C in Luria-Bertani (LB) broth supplemented with 50 μg/mL of ampicillin (Sigma Aldrich, St. Louis, United States). All strains were cultivated with 225 rpm orbital shaking. Yeast and bacterial strains were stored at −80°C in 15% glycerol.

Construction of xylose utilizing strain

To construct the xylose isomerase pathway, the xylose isomerase mutant (xylA3*) [5] under the control of the GPD promoter and an additional copy of XKS1 under the control of the TEF promoter were integrated into the genome of S. cerevisiae BY4741 gre3 knockout strain using integration vectors [19], resulting in SXA-R1. For the higher expression of xylose isomerase expression, an additional copy of xylA3* under the control of the GPD promoter, and tal1 from S. stipitis under the control of the TEF promoter, were also integrated into genome of SXA-R1 strain, resulting in SXA-R2. The integration of the target genes was conducted by linearizing integration vectors by proper restriction enzymes and transforming into the target strains. Yeast transformation was conducted using Frozen EZ Yeast Transformation II Kit (Zymo Research, Irvine, California, United States) according to the manufacturer’s instructions. In each of SXA-R1 and SXA-R2 strains, the pho13 gene was deleted to further improve the xylose utilization by homologous recombination. Pho13 knockout strain of SXA-R1 and SXA-R2 were named as SXA-R1P and SXA-R2P, respectively.

Evolutionary engineering of xylose utilizing strain

To improve xylose utilization of the rationally engineered strain, SXA-R2P was cultured and serial-transferred into 20 ml of fresh YSC medium with 20 g/L of xylose as a sole carbon source in closed 50 ml falcon tubes. The cells were transferred into fresh medium when they were at the exponential and stationary phase using 0.5, 1, and 5% inoculums in biological triplicates. The cells in the exponential phase transfer set were subcultured every 2 days with typical OD values in the range of 1.5 to 2.5. On the other hand, the stationary phase transfers were conducted every 5 days with typical OD values in the range of 2 to 3. After 12 and 5 rounds of exponential and stationary phase transfer, cells were plated onto YSC medium with 20 g/L xylose and the largest colonies were isolated. In total, 130 cells were selected from these plates for further characterization. Cell growth of isolated variants was first compared using Bioscreen C (GrowthCurvesUSA, Piscataway, NJ, USA) and then confirmed in 5 ml of YSC medium with 20 g/L of xylose in a 14 ml culture tube in biological triplicates. The fastest growing strain was selected and named as SXA-R2P-E.

Growth analysis and ethanol fermentation

Aerobic growth rate analysis was performed at low yeast optical density while culturing cells at 30°C in 5 ml of YSC medium with 20 g/L of xylose in a 14 ml culture tubes. Cell density was measured spectrophotometrically at 600 nm absorbance, from which cell dry weight was calculated for the ethanol production and xylose consumption rates. Ethanol fermentations were performed in sealed 50 ml falcon tubes and a bioreactor (New Brunswick Scientific, Enfield, CT, United States). For small-scale fermentation, cells were grown at 30°C in 40 ml of YSC medium with 20 g/L of xylose in a sealed 50 ml falcon tube. For inoculum, one-day-old pre-culture (grown on glucose) was pelleted and re-suspended in xylose medium and inoculated at an initial OD of 20. For a large-scale experiment, ethanol fermentation was conducted in 3 L bioreactor (New Brunswick Scientific, Enfield, CT, United States) with 1.8 L of YSC medium with 40 g/L of xylose. The medium was supplemented with the anaerobic growth factors ergosterol (0.01 g/L) and Tween 80 (Sigma Aldrich, St. Louis, United States) (0.42 g/L) [16]. Medium pH was maintained at 5.0 with 2.5 N NaOH. Though the reactor was not purged with nitrogen gas, DO in the vessel was dropped after 12 hours of operation, and anaerobic condition was maintained throughout the fermentation. Xylose concentrations were measured using an YSI 7100 Multiparameter Bioanalytical System (YSI Life Sciences, Yellow Springs, Ohio, United States) and ethanol concentrations were measured using an Ethanol Assay, UV-method kit (R-Biopharm, Darmstadt, Germany). One OD600 unit was considered as 0.17 g cells/L [8]. Fermentation and growth assays were performed in biological triplicate except the fermentation performed in a bioreactor, which was assayed in technical duplicate.

Additional files

Abbreviations

DO:

Dissolved oxygen

g:

Grams

h:

Hours

L:

Liter

OD or OD600:

Optical density at 600 nm

References

  1. Alper H, Stephanopoulos G: Engineering for biofuels: exploiting innate microbial capacity or importing biosynthetic potential? Nat Rev Microbiol 2009, 7: 715-723. 10.1038/nrmicro2186

    Article  CAS  Google Scholar 

  2. Young E, Lee S-M, Alper H: Optimizing pentose utilization in yeast: the need for novel tools and approaches. Biotechnol Biofuels 2010, 3: 24. 10.1186/1754-6834-3-24

    Article  Google Scholar 

  3. Hahn-Hagerdal B, Karhumaa K, Jeppsson M, Gorwa-Grauslund M: Metabolic engineering for pentose utilization in Saccharomyces cerevisiae . Adv Biochem Eng Biotechnol 2007, 108: 147-177.

    Google Scholar 

  4. Van Vleet JH, Jeffries TW: Yeast metabolic engineering for hemicellulosic ethanol production. Curr Opin Biotechnol 2009, 20: 300-306. 10.1016/j.copbio.2009.06.001

    Article  CAS  Google Scholar 

  5. Lee S-M, Jellison T, Alper HS: Directed evolution of xylose isomerase for improved xylose catabolism and fermentation in the yeast Saccharomyces cerevisiae . Appl Environ Microbiol 2012, 78: 5708-5716. 10.1128/AEM.01419-12

    Article  CAS  Google Scholar 

  6. Runquist D, Hahn-Hagerdal B, Bettiga M: Increased ethanol productivity in xylose-utilizing Saccharomyces cerevisiae via a randomly mutagenized xylose reductase. Appl Environ Microbiol 2010, 76: 7796-7802. 10.1128/AEM.01505-10

    Article  CAS  Google Scholar 

  7. Watanabe S, Abu Saleh A, Pack SP, Annaluru N, Kodaki T, Makino K: Ethanol production from xylose by recombinant Saccharomyces cerevisiae expressing protein-engineered NADH-preferring xylose reductase from Pichia stipitis . Microbiol 2007, 153: 3044-3054. 10.1099/mic.0.2007/007856-0

    Article  CAS  Google Scholar 

  8. Jin Y-S, Alper H, Yang Y-T, Stephanopoulos G: Improvement of xylose uptake and ethanol production in recombinant Saccharomyces cerevisiae through an inverse metabolic engineering approach. Appl Environ Microbiol 2005, 71: 8249-8256. 10.1128/AEM.71.12.8249-8256.2005

    Article  CAS  Google Scholar 

  9. Jin Y-S, Ni H, Laplaza JM, Jeffries TW: Optimal growth and ethanol production from xylose by recombinant Saccharomyces cerevisiae require moderate D-xylulokinase activity. Appl Environ Microbiol 2003, 69: 495-503. 10.1128/AEM.69.1.495-503.2003

    Article  CAS  Google Scholar 

  10. Kuyper M, Hartog MMP, Toirkens MJ, Almering MJH, Winkler AA, van Dijken JP, Pronk JT: Metabolic engineering of a xylose-isomerase-expressing Saccharomyces cerevisiae strain for rapid anaerobic xylose fermentation. FEMS Yeast Res 2005, 5: 399-409. 10.1016/j.femsyr.2004.09.010

    Article  CAS  Google Scholar 

  11. Karhumaa K, Hahn-Hägerdal B, Gorwa-Grauslund M-F: Investigation of limiting metabolic steps in the utilization of xylose by recombinant Saccharomyces cerevisiae using metabolic engineering. Yeast 2005, 22: 359-368. 10.1002/yea.1216

    Article  CAS  Google Scholar 

  12. Fujitomi K, Sanda T, Hasunuma T, Kondo A: Deletion of the PHO13 gene in Saccharomyces cerevisiae improves ethanol production from lignocellulosic hydrolysate in the presence of acetic and formic acids, and furfural. Bioresour Technol 2012, 111: 161-166. 10.1016/j.biortech.2012.01.161

    Article  CAS  Google Scholar 

  13. Van Vleet JH, Jeffries TW, Olsson L: Deleting the para-nitrophenyl phosphatase (pNPPase), PHO13 , in recombinant Saccharomyces cerevisiae improves growth and ethanol production on d-xylose. Metab Eng 2008, 10: 360-369. 10.1016/j.ymben.2007.12.002

    Article  CAS  Google Scholar 

  14. Traff K, Otero Cordero R, Van Zyl W, Hahn-Hagerdal B: Deletion of the GRE3 aldose reductase gene and its influence on xylose metabolism in recombinant strains of Saccharomyces cerevisiae expressing the xylA and XKS1 genes. Appl Environ Microbiol 2001, 67: 5668-5674. 10.1128/AEM.67.12.5668-5674.2001

    Article  CAS  Google Scholar 

  15. Kim SR, Skerker JM, Kang W, Lesmana A, Wei N, Arkin AP, Jin YS: Rational and evolutionary engineering approaches uncover a small set of genetic changes efficient for rapid xylose fermentation in Saccharomyces cerevisiae . PLoS One 2013, 8: e57048. 10.1371/journal.pone.0057048

    Article  CAS  Google Scholar 

  16. Zhou H, Cheng J-s, Wang BL, Fink GR, Stephanopoulos G: Xylose isomerase overexpression along with engineering of the pentose phosphate pathway and evolutionary engineering enable rapid xylose utilization and ethanol production by Saccharomyces cerevisiae . Metab Eng 2012, 14: 611-622. 10.1016/j.ymben.2012.07.011

    Article  CAS  Google Scholar 

  17. Kuyper M, Toirkens MJ, Diderich JA, Winkler AA, van Dijken JP, Pronk JT: Evolutionary engineering of mixed-sugar utilization by a xylose-fermenting Saccharomyces cerevisiae strain. FEMS Yeast Res 2005, 5: 925-934. 10.1016/j.femsyr.2005.04.004

    Article  CAS  Google Scholar 

  18. Garcia Sanchez R, Karhumaa K, Fonseca C, Sanchez Nogue V, Almeida J, Larsson C, Bengtsson O, Bettiga M, Hahn-Hagerdal B, Gorwa-Grauslund M: Improved xylose and arabinose utilization by an industrial recombinant Saccharomyces cerevisiae strain using evolutionary engineering. Biotechnol Biofuels 2010, 3: 13. 10.1186/1754-6834-3-13

    Article  Google Scholar 

  19. Young EM, Comer AD, Huang H, Alper HS: A molecular transporter engineering approach to improving xylose catabolism in Saccharomyces cerevisiae . Metab Eng 2012, 14: 401-411. 10.1016/j.ymben.2012.03.004

    Article  CAS  Google Scholar 

  20. Young EM, Tong A, Bui H, Spofford C, Alper HS: Rewiring yeast sugar transporter preference through modifying a conserved protein motif. Proc Natl Acad Sci U S A 2014, 111: 131-136. 10.1073/pnas.1311970111

    Article  Google Scholar 

  21. Young E, Poucher A, Comer A, Bailey A, Alper H: Functional survey for heterologous sugar transport proteins, using Saccharomyces cerevisiae as a host. Appl Environ Microbiol 2011, 77: 3311-3319. 10.1128/AEM.02651-10

    Article  CAS  Google Scholar 

  22. Ni H, Laplaza JM, Jeffries TW: Transposon mutagenesis to improve the growth of recombinant Saccharomyces cerevisiae on D-xylose. Appl Environ Microbiol 2007, 73: 2061-2066. 10.1128/AEM.02564-06

    Article  CAS  Google Scholar 

  23. Matsushika A, Inoue H, Kodaki T, Sawayama S: Ethanol production from xylose in engineered Saccharomyces cerevisiae strains: current state and perspectives. Appl Microbiol Biotechnol 2009, 84: 37-53. 10.1007/s00253-009-2101-x

    Article  CAS  Google Scholar 

  24. Wei N, Quarterman J, Kim SR, Cate JHD, Jin Y-S: Enhanced biofuel production through coupled acetic acid and xylose consumption by engineered yeast. Nat Commun 2013, 4: 2580.

    Google Scholar 

  25. Karhumaa K, Sanchez R, Hahn-Hagerdal B, Gorwa-Grauslund M-F: Comparison of the xylose reductase-xylitol dehydrogenase and the xylose isomerase pathways for xylose fermentation by recombinant Saccharomyces cerevisiae . Microb Cell Fact 2007, 6: 5. 10.1186/1475-2859-6-5

    Article  Google Scholar 

  26. Farwick A, Bruder S, Schadeweg V, Oreb M, Boles E: Engineering of yeast hexose transporters to transport d-xylose without inhibition by d-glucose. Proc Natl Acad Sci U S A 2014, 111: 5159-5164. 10.1073/pnas.1323464111

    Article  CAS  Google Scholar 

  27. Aeling KA, Salmon KA, Laplaza JM, Li L, Headman JR, Hutagalung AH, Picataggio S: Co-fermentation of xylose and cellobiose by an engineered Saccharomyces cerevisiae. J Ind Microbiol Biotechnol 2012, 39: 1597-1604. 10.1007/s10295-012-1169-y

    Article  CAS  Google Scholar 

  28. Tomitaka M, Taguchi H, Fukuda K, Akamatsu T, Kida K: Isolation and characterization of a mutant recombinant Saccharomyces cerevisiae strain with high efficiency xylose utilization. J Biosci Bioeng 2013, 116: 706-715. 10.1016/j.jbiosc.2013.05.027

    Article  CAS  Google Scholar 

  29. Shen Y, Chen X, Peng B, Chen L, Hou J, Bao X: An efficient xylose-fermenting recombinant Saccharomyces cerevisiae strain obtained through adaptive evolution and its global transcription profile. Appl Microbiol Biotechnol 2012, 96: 1079-1091. 10.1007/s00253-012-4418-0

    Article  CAS  Google Scholar 

  30. Portnoy VA, Bezdan D, Zengler K: Adaptive laboratory evolution — harnessing the power of biology for metabolic engineering. Curr Opin Biotechnol 2011, 22: 590-594. 10.1016/j.copbio.2011.03.007

    Article  CAS  Google Scholar 

  31. Hong K-K, Vongsangnak W, Vemuri GN, Nielsen J: Unravelling evolutionary strategies of yeast for improving galactose utilization through integrated systems level analysis. Proc Natl Acad Sci U S A 2011, 108: 12179-12184. 10.1073/pnas.1103219108

    Article  CAS  Google Scholar 

Download references

Acknowledgements

We acknowledge financial support for this project from the University of Texas at Austin Research Grant Program and the DuPont Young Investigator Award.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Hal S Alper.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

SML conducted the experimental work and coordinated the manuscript draft and revision. TJ performed the experimental work. HSA conceived the study, interpreted research results, and coordinated the manuscript draft and revision. All authors read and approved the final manuscript.

Electronic supplementary material

13068_2014_122_MOESM1_ESM.pdf

Additional file 1: Figure S1.: The aerobic cell growth of the evolutionary engineered strain of SXAR2P-E on xylose. The evolutionary engineering improved the aerobic cell growth of the strain harboring a xylose isomerase-based pathway on xylose. The evolved strain of SXA-R2P-E (black) reached stationary growth phase faster than the rationally engineered strain of SXA-R2P (grey). Error bars represent the standard deviation of biological triplicates. (PDF 27 KB)

13068_2014_122_MOESM2_ESM.pdf

Additional file 2: Figure S2.: Anaerobic fermentation of xylose with the evolved strain with low initial OD. Ethanol production (black) and xylose consumption (white) profiles of the evolved strain were measured during anaerobic batch fermentation in a bioreactor. The evolved strain was inoculated at an initial OD of 1. Medium pH was maintained at 6.0 with 2.5 N NaOH. Error bars represent the standard deviation of technical duplicates. (PDF 27 KB)

Authors’ original submitted files for images

Rights and permissions

Open Access  This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.

The Creative Commons Public Domain Dedication waiver (https://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Lee, SM., Jellison, T. & Alper, H.S. Systematic and evolutionary engineering of a xylose isomerase-based pathway in Saccharomyces cerevisiae for efficient conversion yields. Biotechnol Biofuels 7, 122 (2014). https://doi.org/10.1186/s13068-014-0122-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s13068-014-0122-x

Keywords