Skip to main content

Co-culturing a novel Bacillus strain with Clostridium tyrobutyricum ATCC 25755 to produce butyric acid from sucrose

Abstract

Background

Currently, the most promising microorganism used for the bio-production of butyric acid is Clostridium tyrobutyricum ATCC 25755T; however, it is unable to use sucrose as a sole carbon source. Consequently, a newly isolated strain, Bacillu s sp. SGP1, that was found to produce a levansucrase enzyme, which hydrolyzes sucrose into fructose and glucose, was used in a co-culture with this strain, permitting C. tyrobutyricum ATCC 25755T to ferment sucrose to butyric acid.

Results

B. sp. SGP1 alone did not show any butyric acid production and the main metabolite produced was lactic acid. This allowed C. tyrobutyricum ATCC 25755T to utilize the monosaccharides resulting from the activity of levansucrase together with the lactic acid produced by B. sp. SGP1 to generate butyric acid, which was the main fermentative product within the co-culture. Furthermore, the final acetic acid concentration in the co-culture was significantly lower when compared with pure C. tyrobutyricum ATCC 25755T cultures grown on glucose. In fed-batch fermentations, the optimum conditions for the production of butyric acid were around pH 5.50 and a temperature of 37°C. Under these conditions, the final butyrate concentration was 34.2±1.8 g/L with yields of 0.35±0.03 g butyrate/g sucrose and maximum productivity of 0.3±0.04 g/L/h.

Conclusions

Using this co-culture, sucrose can be utilized as a carbon source for butyric acid production at a relatively high yield. In addition, this co-culture offers also the benefit of a greater selectivity, with butyric acid constituting 92.8% of the acids when the fermentation was terminated.

Background

Butyric acid has several potential applications in chemical and pharmaceutical industries and can be useful for fuel production [1]. It is also widely used in foodstuffs and beverage industries [2]. Nowadays, butyric acid is produced mainly for industry from crude oil through petrochemical methods [2]. However, butyric acid obtained from microbial fermentation is more promising due to the growing needs for bio-based natural products especially for food additives, and pharmaceuticals [3].

Currently, the most promising microorganism used for the bio-production of butyric acid is Clostridium tyrobutyricum ATCC 25755T[47]. This strain is capable of producing butyric acid with high selectivity and can tolerate high concentrations. However, it can only ferment monosaccharides like glucose, xylose and fructose, and is currently unable to utilize disaccharides, such as sucrose and lactose [810]. Despite the presence of several butyric acid bacteria which can utilize sucrose as a carbon source, such as Clostridium butyricum[11, 12] and some strains of C. tyrobutyricum, such as C. tyrobutyricum ZJU8235 [13], C. tyrobutyricum ATCC 25755T offers the highest butyric acid yields and final concentrations and so is the preferred strain.

Since the cost of culture media components has a great influence on the overall cost of butyric acid produced by fermentation [2, 10], we wanted to utilize cheaper substrates for butyric acid production. One such substrate, sucrose, is an important and relatively cheap carbon source and is readily available in nature. It forms more than 90% of the total carbohydrates in sugar canes [14] and sugar beet in which sugars can account for 12% to 20% of the plant's dry weight. Sucrose also constitutes large percentage of the total sugar content in molasses. Consequently, our lab seeks to use sucrose as a carbon source for butyric acid production.

In previous studies, several research groups evaluated the use of co-culturing to address limitation in substrate utilization by individual strains for the eventual production of different fermentation products. For example, Zhang et al. (2009) [3] discussed the possibility of using Clostridium thermocellum in a co-culture with Clostridium thermobutyricum for butyric acid production from cellulose, while Chang et al. (2008) [15] reported that the combination of aerobic Bacillus and anaerobic Clostridium may play the key role in the future of biofuel production from biomass. Their rationale was that strains of Bacillus generally have a high growth rate and secrete many saccharification-related extracellular enzymes into the medium, such as amylase, pectinase, protease, cellulose, and hemicellulase. Trana et al. (2010) [16] have recently shown the potential of co-culturing Bacillus subtilis with Clostridium butylicum for butanol production from starch. However, the Bacillus species used in the above studies are aerobic and, as such, they cannot be stably used in co-cultures for long periods with Clostridia, which are anaerobic. In contrast, Bacillus strains which are facultative anaerobes such as Bacillus licheniformis, will be more appropriate for long term co-culturing with Clostridium strains under anaerobic conditions.

In this study, we characterized the levansucrase activity of a newly isolated strain of Bacillus which was found to be closely related to B.licheniformis ATCC 14580T and Bacillus sonorensis NRRL B-23154T based upon 16S rRNA gene sequencing. To demonstrate its applicability, we next performed co-culture fermentations with this strain and C. tyrobutyricum ATCC 25755T for butyric acid production using sucrose as a carbon source.

Results and discussion

B. sp. SGP1 Hydrolyzes sucrose through levansucrase

B. sp. SGP1 was isolated from a waste water sludge sample obtained from anaerobic digestion tank. Identifying this strain through 16S rRNA gene sequencing revealed that its closest relative was Bacillus licheniformis ATCC 14580T (99.4%, 16S rRNA gene similarity) followed by Bacillus sonorensis NRRL B-23154T (99.3%) and Bacillus aerius 24KT (99.3%). The phylogenetic analysis (Additional file 1: Figure S1) showed that the strain SGP1 formed a monophyletic group with B. licheniformis ATCC 14580T, B. sonorensis NRRL B-23154T and B. aerius 24KT.

When B. sp. SGP1 was cultured alone on sucrose in batch cultures, lactic acid was the main fermentation product (Figure 1). After 16 h of growth, the optical density leveled off and remained steady for about 20 h longer. During this time, though, sucrose hydrolysis continued as evidenced by the increasing concentration of glucose found within the culture supernatant.

Figure 1
figure 1

Growth profile of B. sp. SGP1 when cultured on RCM supplemented with sucrose in serum bottle at 37°C under anoxic conditions.

Many groups reported previously that several Bacillus strains, and specifically B. licheniformis, are able to produce levansucrase. This enzyme can both hydrolyze sucrose into its constituent glucose and fructose subunits and form the levan polymer from the fructose subunits [17, 18]. Previous studies demonstrated that levansucrase also degrades levan to individual fructose monomers especially when the reducing sugar concentration is low [1820]. Consequently, we tested for the production of levansucrase by B. sp. SGP1. For colonies grown on agar plates containing sucrose, the production of a polysaccharide was obvious as they showed a slimy mucoid growth. In contrast, when grown on agar plates containing glucose, none of the colonies were mucoid. This polysaccharide was consequently precipitated from liquid cultures of B. sp. SGP1 grown on sucrose and hydrolyzed to its constituent monosaccharides. Analysis of these sugars by HPLC (High-performance liquid chromatography) found fructose monomers, implying that the polysaccharide was levan and that the extracellular enzyme is levansucrase.

To further confirm that the enzyme responsible is levansucrase, the proteins present in the supernatant of a 24 h old culture were precipitated and run on an SDS-page gel. After renaturing the proteins, the levan was formed and stained as described in the Materials and Methods. The presence of the levan polymer within the gel is clearly seen in Figure 2. Only one band was observed and it corresponded to a protein having a molecular weight of approximately 55 KDa, a weight that is similar to that of levansucrase enzymes from other species [20]. Further characterization established that this enzyme was optimally active at a neutral pH (Figure 3) and at temperatures of up to 43ºC, the highest temperature tested in this study (Additional file 2: Figure S2). Consequently, it can be used within co-cultures with many fermentative clostridia, which grow best at mesophilic temperatures.

Figure 2
figure 2

Levansucrase molecular mass analysis by SDS-PAGE gel. The band was revealed by in situ levan synthesis as described in the materials and methods.

Figure 3
figure 3

Sucrase and levan forming activities of B. sp. SGP1 supernatant at different pH values. The liberated glucose and levan concentrations were determined as described in the materials and methods.

Co-culturing B. sp. SGP1 with C. tyrobutyricum ATCC 25755T

Since B. sp. SGP1 produces glucose during the hydrolysis of sucrose but does not continue to utilize or ferment it after its initial growth (Figure 1), we hypothesized that this strain can be used in conjunction with other fermentative strains and particularly those that show substrate limitations towards sucrose, such as C. tyrobutyricum ATCC 25755T[10]. To evaluate this, several cultures were grown using these two strains independently or together with either glucose or sucrose as the fermentative substrate. The cultures were evaluated based upon the amount of butyric acid produced over time (Figure 4). Growth of C. tyrobutyricum ATCC 25755T or B. sp. SGP1 by themselves on RCM (Reinforced Clostridial Media) supplemented with sucrose gave little or no butyric acid, respectively. However, when these two strains were co-cultured on sucrose, a significant amount of butyric acid was produced, i.e., 13.5 g/L (Figure 4A), indicating that C. tyrobutyricum ATCC 25755T was able to ferment the monosaccharides produced by the levansucrase.

Figure 4
figure 4

A) Butyric acid production by individual and mixed cultures of B. sp. SGP1 and C. tyrobutyricum ATCC 25755T. This experiment was performed using RCM supplemented with sucrose or glucose in serum bottles at 37°C under anoxic conditions. B) Plot showing the acetic acid concentration when C. tyrobutyricum ATCC 25755T was cultured alone on glucose and from the co-culture grown on sucrose.

Interestingly, it was found that the amount of butyric acid produced by the co-culture in serum bottles using sucrose is actually higher than that produced from C. tyrobutyricum ATCC 25755T when grown alone on the same amount of glucose (Figure 4A). In contrast, the final acetate concentration in the co-culture was significantly lower than that seen from C. tyrobutyricum ATCC 25755T cultured solely on glucose (Figure 4B). These two findings are likely related as the final total acid concentrations within the cultures were similar, 14.6 g/L for the co-culture and 14.8 g/L for C. tyrobutyricum, indicating that the co-culture is capable of utilizing more of the acetate within the media and producing a subsequently higher amount of butyric acid. One possible explanation that can account for the lower acetate levels found in the co-culture is the glucose concentration, which was undetectable (< 0.1 g/L) during the exponential growth phase. Consequently, it would appear that it was consumed immediately by the culture as soon as it was produced from sucrose. Under similar glucose-limited conditions, other groups have found that C. tyrobutyricum ATCC 25755T shifts more carbon to the butyrate pathway instead of acetate production [3, 21].

Another possible reason for this is the activity of B. sp. SGP1, which produces lactic acid (Figure 1). Given that lactic acid was not detected within the co-culture, it appears that it and acetic acid are co-metabolized by C. tyrobutyricum ATCC 25755T as fermentative substrates to produce butyric acid [8, 9]. As evidence of this, batch cultures of C. tyrobutyricum ATCC 25755T were grown using P2 medium supplemented with either glucose (40.0 g/L), lactic acid (10.0 g/L in the form of sodium lactate) or both (Figure 5). When lactic acid was added alone, both it and the acetate present in the media were consumed (Figure 5C and E), leading to butyric acid production (Figure 5D). The consumption of two acids and subsequent production of only one led to a significant increase in the pH as the molar concentration of acids was nearly halved, i.e., 0.025 M of acetate and 0.070 M lactate produced 0.053 M butyrate (Figure 5F). These results confirm that acetate and lactate can be co-utilized by C. tyrobutyricum ATCC 25755T to produce butyric acid, with a yield under these conditions of 0.6 g butyrate/g (acetate and lactate). In fact, this is in agreement with the equation reported previously for acetate-lactate fermentation by C. butyricum, where:

Acetate + 3 Lactate + ADP + P i 2 Butyrate + 2 H 2 + ATP

[22].

Figure 5
figure 5

Characteristics of C. tyrobutyricum ATCC 25755Tcultures grown on P2 medium supplemented with either 40.0 g/L glucose (Glu), 40.0 g/L glucose and 10.0 g/L lactate (Glu+Lac), 10.0 g/L lactate (Lac) or nothing (Control). This results shown are (A) optical density, (B) glucose concentration, (C) lactic acid concentration, (D) butyric acid concentration, (E) acetic acid concentration and (F) pH of the cultures.

When lactic acid was added along with glucose, C. tyrobutyricum ATCC 25755T showed an enhanced growth and butyric acid production, which can be in part attributed to the pH buffering effect described above. In confirmation of Figure 4A, the acetate concentration did not increase, as was seen when glucose was added alone, while the lactic acid concentration decreased, suggesting that these two acids were once more being converted into butyric acid.

Lactic acid is converted only into butyric acid not acetic acid

To confirm that lactic acid is being converted by C. tyrobutyricum ATCC 25755T into butyric acid only, P2 medium was prepared once more but with a mixture of 12C- glucose (40.0 g/L) and [1, 2, 3 13C3] lactic acid (5.0 g/L). After 40 h of culturing, samples were taken, and the resulting butyric and acetic acids were analyzed for the presence of 13C (Figure 6). Acetic acid showed only a single peak at 60 (m/z) corresponding to the expected molecular weight of 12C2-acetic acid. For butyric acid, however, we found multiple molecular peaks at 88 (m/z), which corresponds to the molecular weight of 12C4-butyric acid, as well as at 89, 90, 91 and 92 (m/z), indicating the existence of significant amounts of 13C in butyric acid. These results demonstrate that the lactic acid present in the media is being used as a substrate by C. tyrobutyricum ATCC 25755T and that it is being converted only into butyric acid and not for acetic acid production even in presence of another carbon source in the medium such as glucose.

Figure 6
figure 6

GC-MS spectra of acetic and butyric acids present in the culture broth of C. tyrobutyricum ATCC 25755Tafter culturing for 40 h in P2 medium with 12C 6 -glucose (40.0 g/L) and [1,2,3-13C 3 ] lactic acid (5.0 g/L). A) Mass spectra of butyric acid showing the presence of significant amounts of butyric acid with molecular weights higher than 88 (i.e.: 89, 90, 91 and 92) indicating the corporation of 13C. B) Mass spectra of acetic acid showing the absence of 13C in the acetic acid.

Optimizing pH conditions in the co-culture for butyric acid production

The optimum pH for culturing B. sp. SGP1 was around 7.0 while more acidic conditions led to a decreased growth (Additional file 3: Figure S3). However, for C. tyrobutyricum ATCC 25755T, the optimum pH for growth and butyric acid production is known to be 5.9 to 6.0 [46, 23], a value that we used previously to produce more than 50 g/L butyric acid [7]. For this co-culture, we tried fed-batch fermentations at different pH values (5.9, 5.7, 5.5, and 5.3). All fermentations were performed at 37°C as this temperature was found to be the best for the co-culture based upon butyric acid final concentration (Additional file 4: Figure S4).

Interestingly, the optimum pH for the co-culture both in terms of growth and butyric acid production was 5.5 (Figure 7) which is lower than the optimum for growth of either strain. At this pH, the maximum productivity was 0.3±0.04 g/L/h and the final butyrate concentration was 34.2±1.8 g/L with a yield of 0.35±0.03 g butyrate/g sucrose based upon the amount of sucrose consumed. By comparison, in a previous study done by our group employing immobilized C. tyrobutyricum ATCC 25755T, a yield of 0.45 g butyrate/g glucose was reported using the same media as in this study [7]. Another study looking at the fed-batch addition of carbonated beverages, which contain sucrose, glucose and fructose, to cultures of C. tyrobutyricum ATCC 25755T grown in RCM media found yields of 0.42 ± 0.11 g/g [10], a value that is comparable with that seen in our study. The final acetate and lactate concentrations in the medium were 2.5 g/L and 0.2 g/L, respectively. Accordingly, this co-culture was selective for butyric acid, with 92.8% of the final acids by weight being butyric acid. By comparison, our previous study found butyric acid constituted only 82% of the total acids when 35.4 g/L butyric acid was produced during a fed batch culture with glucose [7].

Figure 7
figure 7

Typical B. sp. SGP1 and C. tyrobutyricum ATCC 25755Tco-culture fed-batch fermentation in RCM supplemented with sucrose at pH 5.5 and 37°C. The plots show (A) the sugars consumption profile and (B)the optical density of the cultures and their production profiles for butyric, acetic and lactic acids.

On the other hand, at the higher pH values tested (5.7, and 5.9), the final butyric acid concentrations were both lower; 26.3 g/L and 16.6 g/L for pHs 5.7 and 5.9 respectively while the acetic acid final concentrations were 1.0 g/L and 1.5 g/L respectively. It is thought that this may be attributed to the enhanced growth of B. sp. SGP1 at these higher pH values, leading to competition for the sugars produced. On the other hand, the final butyrate and acetic acid concentrations with the lowest pH tested, i.e., 5.3 were 20.8 and 10.0 g/L respectively. It was also observed that the glucose concentration was lower than 0.1 g/L throughout the course of fermentation when the pH was 5.5, 5.7, and 5.9 while, at pH 5.3, it was increasing constantly during the course of fermentation to reach 10.0 g/L near the end of the fermentation (Data not shown). It is also worthy to note that, with an optimum pH of 5.5, the sucrose hydrolysis was higher during the early stages of the fermentation than during the latter (>100 h), suggesting that the Bacillus strain was limited in its growth or activity.

The ability of the co-culture to grow in RCM medium without previous purging with an inert gas

C. tyrobutyricum ATCC 25755T is a strict anaerobe and sensitive to oxygen so the culturing medium needs to be purged with an inert gas like nitrogen or argon prior to inoculation to provide anoxic conditions. However, this purging contributes to the total cost for butyric acid production. Since B. sp. SGP1 strain is a facultative anaerobe, we wanted to test the ability of this co-culture to grow in RCM medium without prior purging. We found that the co-culture could grow successfully and produce butyric acid, albeit after a longer lag time (Figure 8). It appears that B. sp. SGP1 grew and consumed the oxygen present in the medium, thus providing the anoxic conditions needed for the growth of C. tyrobutyricum ATCC 25755T. This finding is important since it suggests that fermentations using these two bacteria can be performed using media without purging, allowing industries to reduce their production costs.

Figure 8
figure 8

Growth of and butyric acid production by B. sp. SGP1 and C. tyrobutyricum ATCC 25755Tco-cultures with and without purging of the medium with argon gas. The cultures were grown in serum bottles at 37°C using RCM supplemented with sucrose.

Conclusions

Although C. tyrobutyricum ATCC 25755T alone is unable to utilize sucrose, using a co-culture of C. tyrobutyricum ATCC 25755T and B. sp. SGP1, this study demonstrates that sucrose can be utilized as a carbon source for butyric acid production. In addition, this co-culture offers also the benefit of a greater selectivity for butyric acid. Another advantage of this co-culture is its ability to produce butyric acid at a relatively high yield, which is similar to the yield obtained by pure cultures of C. tyrobutyricum ATCC 25755T grown on glucose. One drawback for this proposed co-culture is the low productivity during fed-batch fermentations. This can be improved in future studies by changing the medium composition or the fermentation mode to optimize the growth kinetics of the two strains. Likewise, future work may also include using this novel B. sp. SGP1 strain or other Bacillus strains in similar co-cultures with C. tyrobutyricum ATCC 25755T for production of butyric acid but from other carbon sources, such as starch or cellulose.

Materials and methods

Reagents

All of the chemicals and reagents used were purchased from the Sigma-Aldrich Co. USA, unless mentioned otherwise. The reagents, when available, were molecular biology grade. All solutions were prepared using these reagents and sterile distilled water.

Bacterial strains and culturing methods

B. sp. SGP1 was isolated from a waste water sludge sample obtained from the Hyum Ki So Hwa Jo anaerobic digestion tank, Seoul, South Korea. This strain was co-cultured with C. tyrobutyricum ATCC 25755T in reinforced clostridial media (RCM). The media was made fresh using the individual components and supplemented with 40.0 g/L of either sucrose for the co-culture tests or B. sp. SGP1 monocultures or glucose for C. tyrobutyricum ATCC 25755T monocultures. The composition of the RCM medium was as follows: beef extract (Difco, USA) 10.0 g/L, peptone (Difco, USA) 5.0 g/L, yeast extract (Difco, USA) 3.0 g/L, tryptone (Difco, USA) 5.0 g/L, starch 1.0 g/L, sodium acetate 3.0 g/L, and NaCl 5.0 g/L. The medium was purged with argon gas and aliquoted into 60 ml serum bottles (20 ml in each), after which it was sterilized by autoclaving at 121°C for 20 minutes. For some experiments, P2 medium was used instead of RCM. The composition of the P2 medium was as follows: yeast extract (Difco, USA) 1.0 g/L, K2HPO4 0.5 g/L, KH2PO4 0.5 g/L, ammonium acetate 2.2 g/L, p-aminobenzoate 0.001 g/L, thiamin 0.001 g/L, biotin 0.00001 g/L, MgSO4.7H2O 0.2 g/L, MnSO4.H2O 0.01 g/L, FeSO4.7H2O 0.01 g/L, and NaCl 0.01 g/L. Unless else is mentioned, incubation and growth of the cultures was done in a shaking incubator at 37°C and 200 rpm.

Analytical methods

Quantitative analysis of the volatile fatty acids (acetic and butyric acids) was done using GC (gas chromatography) (6890N, Agilent Technology, USA). Helium was used as the carrier gas. The oven temperature was programmed to increase from 50 to 240°C at a rate of 10°C/min. The temperature of the injection port and FID (Flame Ionization Detector) were 250°C. The concentration of the acids was determined according to a standard calibration curve. For analysis of the sugars and lactic acid, an HPLC (1200 Series, Agilent Technology, USA) with an RID (Refractive Index Detector) was used under the following conditions: mobile phase, 0.01M sulfuric acid; column, Aminex HPX-87H (dimensions - 300*7.8, Biorad, USA); flow rate, 0.5 ml/min; temperature, 40°C. The optical densities of the samples were measured using spectrophotometer (UV-mini 1240, Shimadzu, Japan) at 600 nm. To prove that [1, 2, 3 13C3] lactic acid is converted to butyric acid and not acetic acid by C. tyrobutyricum ATCC 25755T, spent culture broth was analyzed using GC equipped with a Pegasus 2D TOF-MS (LECO, St. Joseph, MI, USA) for detecting the presence of 13C in acetic and butyric acids. The column was HP-INNOWAX Polyethylene glycol (PEG) capillary column (17 m × 0.32 mm internal diameter, 0.25 μm film thickness, Agilent Technology, USA). The oven temperature was programmed to increase from 50°C to 150°C at a rate of 10°C/min. Helium was used as the carrier gas with a flow rate of 3 ml/min. The ionization mode employed was EI (electron impact ionization) with a scan rate of 100 spectra/sec and mass range of 40~500 m/z. The ion source temperature was 230°C [24].

Identification of the isolated Bacillus strain

The 16S rRNA gene sequence of the strain SGP1 was used as a query against the EzTaxon-e database [25, 26] and the 16S rRNA gene sequence of relatives were retrieved. The construction and evaluation of the phylogenetic trees were performed as described previously [27]. The alignment and phylogenetic analysis were performed using MEGA5 [28]. The 16s rRNA gene sequence of the strain SGP1 was submitted to GenBank (http://www.ncbi.nlm.nih.gov) and is registered under accession number HQ188291.1.

Fermentation conditions

Fed-batch fermentations were done using a 3 L capacity bioreactor (Fermentec Co. Ltd., Korea) with an initial working volume of 1 L. The medium was RCM supplemented with 60.0 g/L sucrose (Sigma-Aldrich Co. USA). After autoclaving, the medium was purged with filtered oxygen-free argon gas. Overnight pre-cultures of the two strains were inoculated into the reactor at a concentration of 5% (v/v) for each strain. All fermentations were performed using agitation (200 rpm) and the pH was adjusted to the required values (5.3 – 5.9) by addition of a 10% ammonia solution, prepared by diluting an ammonium hydroxide solution (Cat # 320145, Sigma-Aldrich Co. USA) using sterile distilled water.

Observing levansucrase enzyme on an SDS-PAGE gel

A one-day (24 h) aerobic culture of B. sp. SGP1 was centrifuged and the supernatant was taken as a source for levansucrase enzyme. Concentration of the supernatant proteins was done through addition of acetone, centrifugation and then re-dissolving the precipitated proteins in phosphate buffer (pH 7.0). SDS-PAGE gel was then carried out as described by Laemmli with a 7% (w/v) acrylamide gel. After migration, the gel was cut into two halves. One half (containing the protein markers) was stained with Coomassie blue. The other half (containing the samples) was stained using periodic acid-Schiff reagent method [2932] as follows: first, the gel was washed in a washing buffer containing 10 mM phosphate buffer (pH 7), CaCl2 (2 mM), and Tween 80 (10.0 g/L). Then the gel was incubated in the same solution but with 50 g/L sucrose, for 24 h at 37°C. After that, the formed levan was fixed on the gel through immersing in 70% ethanol, then the oxidizing solution (periodic acid o.7% (w/v), acetic acid 5% (w/v)) was added, followed by sodium bisulfate washing, and finally immersing in Schiff’s reagent (Sigma Aldrich, USA, Cat #; 3952016).

Sucrase and levan forming activity assay

The sucrase and levan forming activities at different temperatures and different pH values were determined by adding 50 μl of spent media, i.e. without cells, from a 20 h old B. sp. SGP1 culture to 950 μl of the reaction mixture (0.5 M sucrose solution in phosphate buffer) [18]. To study the effect of the temperature, the pH was first adjusted to 6.6 before incubation at the test temperatures. Likewise, a temperature of 37°C was used when studying the effect of the pH. The incubation was performed for 10 h, after which, the sucrase and the levan forming activities were measured. Sucrase activity was determined by measuring the glucose liberated using glucose kits (Merck, Germany, Cat # 1.16720.0001), while levan formed was measured using the following procedure: 500 μl of the sample was added to 750 μl ethanol (to precipitate levan), and then the mixture was centrifuged. The precipitate was then washed with ethanol again, dried and then boiled with 0.1 N HCl for 30 min. Finally, the liberated fructose was analyzed using HPLC [14, 18].

Abbreviations

RCM:

Reinforced clostridial medium

GC:

Gas chromatography

HPLC:

High-performance liquid chromatography

FID:

Flame ionization detector

RID:

Refractive index detector

GC-MS:

Gas chromatography–mass spectrometry

EI:

Electron impact ionization

References

  1. Zigova J, Sturdik E: Advances in biotechnological production of butyric acid. J Ind Microbiol Biot 2000, 24: 153-160. 10.1038/sj.jim.2900795

    Article  CAS  Google Scholar 

  2. Dwidar M, Park JY, Mitchell RJ, Sang BI: The future of butyric acid in industry. TheScientificWorldJournal 2012, 2012: 471417.

    Article  Google Scholar 

  3. Zhang CH, Yang H, Yang FX, Ma YJ: Current Progress on Butyric Acid Production by Fermentation. Curr Microbiol 2009, 59: 656-663. 10.1007/s00284-009-9491-y

    Article  CAS  Google Scholar 

  4. Liu XG, Zhu Y, Yang ST: Butyric acid and hydrogen production by Clostridium tyrobutyricum ATCC 25755 and mutants. Enzyme Microb Tech 2006, 38: 521-528. 10.1016/j.enzmictec.2005.07.008

    Article  CAS  Google Scholar 

  5. Zhu Y, Yang ST: Effect of pH on metabolic pathway shift in fermentation of xylose by Clostridium tyrobutyricum . J Biotechnol 2004, 110: 143-157. 10.1016/j.jbiotec.2004.02.006

    Article  CAS  Google Scholar 

  6. Wu ZT, Yang ST: Extractive fermentation for butyric acid production from glucose by Clostridium tyrobutyricum . Biotechnol Bioeng 2003, 82: 93-102. 10.1002/bit.10542

    Article  CAS  Google Scholar 

  7. Mitchell RJ, Kim JS, Jeon BS, Sang BI: Continuous hydrogen and butyric acid fermentation by immobilized Clostridium tyrobutyricum ATCC 25755: Effects of the glucose concentration and hydraulic retention time. Bioresource Technol 2009, 100: 5352-5355. 10.1016/j.biortech.2009.05.046

    Article  CAS  Google Scholar 

  8. Bryant MP, Burkey LA: The Characteristics of Lactate-Fermenting Sporeforming Anaerobes from Silage. J Bacteriol 1956, 71: 43-46.

    CAS  Google Scholar 

  9. Gibson T: Clostridia in Silage. J Appl Bacteriol 1965, 28: 56.

    Google Scholar 

  10. Dwidar M, Lee S, Mitchell RJ: The production of biofuels from carbonated beverages. Appl Energ 2012, 100: 47-51.

    Article  CAS  Google Scholar 

  11. He GQ, Kong Q, Chen QH, Ruan H: Batch and fed-batch production of butyric acid by Clostridium butyricum ZJUCB. J Zhejiang University 2005, 6B: 5.

    Google Scholar 

  12. Zigova J, Sturdik E, Vandak D, Schlosser S: Butyric acid production by Clostridium butyricum with integrated extraction and pertraction. Process Biochem 1999, 34: 835-843. 10.1016/S0032-9592(99)00007-2

    Article  CAS  Google Scholar 

  13. Jiang L, Cai J, Wang JF, Liang SZ, Xu ZN, Yang ST: Phosphoenolpyruvate-dependent phosphorylation of sucrose by Clostridium tyrobutyricum ZJU 8235: Evidence for the phosphotransferase transport system. Bioresource Technol 2010, 101: 304-309.

    CAS  Google Scholar 

  14. Viikari L, Gisler R: By-products in the fermentation of sucrose by different Zymomonas strains. Appl Microbiol Biotechnol 1986, 23: 5.

    Article  Google Scholar 

  15. Chang JJ, Chou CH, Ho CY, Chen WE, Lay JJ, Huang CC: Syntrophic co-culture of aerobic Bacillus and anaerobic Clostridium for bio-fuels and bio-hydrogen production. Int J Hydrogen Energ 2008, 33: 5137-5146. 10.1016/j.ijhydene.2008.05.021

    Article  CAS  Google Scholar 

  16. Tran HTM, Cheirsilp B, Hodgson B, Umsakul K: Potential use of Bacillus subtilis in a co-culture with Clostridium butylicum for acetone-butanol-ethanol production from cassava starch. Biochem Eng J 2010, 48: 260-267. 10.1016/j.bej.2009.11.001

    Article  CAS  Google Scholar 

  17. Ghaly AE, Arab F, Mahmoud NS, Higgins J: Production of Levan by Bacillus licheniformis for Use as a Soil Sealant in Earthen Manure Storage Structures. Am J Biotechnol Biochem 2007, 3: 8.

    Google Scholar 

  18. Ssenthikumar V, Gunasekaran P: Influence of fermentation conditions on levan production by Zymomonas mobilis CT2. Indian J Biotechnol 2005, 4: 6.

    Google Scholar 

  19. Hettwer U, Gross M, Rudolph K: Purification and Characterization of an Extracellular Levansucrase from Pseudomonas-Syringae Pv Phaseolicola. J Bacteriol 1995, 177: 2834-2839.

    CAS  Google Scholar 

  20. Ben Ammar Y, Matsubara T, Ito K, Izuka M, Limpaseni T, Pongsawasdi P, Minamiura N: Characterization of a thermostable levansucrase from Bacillus sp TH4-2 capable of producing high molecular weight levan at high temperature. J Biotechnol 2002, 99: 111-119. 10.1016/S0168-1656(02)00160-8

    Article  CAS  Google Scholar 

  21. Fayolle F, Marchal R, Ballerini D: Effect of Controlled Substrate Feeding on Butyric-Acid Production by Clostridium tyrobutyricum . J Ind Microbiol 1990, 6: 179-183. 10.1007/BF01577693

    Article  CAS  Google Scholar 

  22. Kim BH, Gadd GM: Anaerobic fermentation. In Bacterial Physiology and Metabolism. 1st edition. United States of America Cambridge University Press; 2008:265-267.

    Chapter  Google Scholar 

  23. Liu XG, Yang ST: Kinetics of butyric acid fermentation of glucose and xylose by Clostridium tyrobutyricum wild type and mutant. Process Biochem 2006, 41: 801-808. 10.1016/j.procbio.2005.10.009

    Article  CAS  Google Scholar 

  24. Oshiro M, Hanada K, Tashiro Y, Sonomoto K: Efficient conversion of lactic acid to butanol with pH-stat continuous lactic acid and glucose feeding method by Clostridium saccharoperbutylacetonicum . Appl Microbiol Biot 2010, 87: 1177-1185. 10.1007/s00253-010-2673-5

    Article  CAS  Google Scholar 

  25. Chun J, Lee JH, Jung Y, Kim M, Kim S, Kim BK, Lim YW: EzTaxon: a web-based tool for the identification of prokaryotes based on 16S ribosomal RNA gene sequences. Int J Syst Evol Microbiol 2007, 57: 2259-2261. 10.1099/ijs.0.64915-0

    Article  CAS  Google Scholar 

  26. Kim OS, Cho YJ, Lee K, Yoon SH, Kim M, Na H, Park SC, Jeon YS, Lee JH, Yi H: Introducing EzTaxon-e: a prokaryotic 16S rRNA gene sequence database with phylotypes that represent uncultured species. Int J Syst Evol Microbiol 2012, 62: 716-721. 10.1099/ijs.0.038075-0

    Article  CAS  Google Scholar 

  27. Kim S, Jeong H, Chun J: Clostridium aestuarii sp. nov., from tidal flat sediment. Int J Syst Evol Microbiol 2007, 57: 1315-1317. 10.1099/ijs.0.64428-0

    Article  CAS  Google Scholar 

  28. Tamura K, Peterson D, Peterson N, Stecher G, Nei M, Kumar S: MEGA5: molecular evolutionary genetics analysis using maximum likelihood, evolutionary distance, and maximum parsimony methods. Mol Biol Evol 2011, 28: 2731-2739. 10.1093/molbev/msr121

    Article  CAS  Google Scholar 

  29. Kapitany RA, Zebrowsk E: High-Resolution Pas Stain for Polyacrylamide-Gel Electrophoresis. Anal Biochem 1973, 56: 361-369. 10.1016/0003-2697(73)90202-9

    Article  CAS  Google Scholar 

  30. Miller AW, Robyt JF: Detection of Dextransucrase and Levansucrase on Polyacrylamide Gels by the Periodic Acid Schiff Stain - Staining Artifacts and Their Prevention. Anal Biochem 1986, 156: 357-363. 10.1016/0003-2697(86)90266-6

    Article  CAS  Google Scholar 

  31. Dols M, Remaud-Simeon M, Willemot RM, Vignon M, Monsan P: Characterization of the different dextransucrase activities excreted in glucose, fructose, or sucrose medium by Leuconostoc mesenteroides NRRL B-1299. Appl Environ Microb 1998, 64: 1298-1302.

    CAS  Google Scholar 

  32. Munoz-Gutierrez I, Rodriguez-Alegria ME, Munguia AL: Kinetic behaviour and specificity of beta-fructosidases in the hydrolysis of plant and microbial fructans. Process Biochem 2009, 44: 891-898. 10.1016/j.procbio.2009.04.013

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The authors would like to thank Mr Taewoo Yum (Clean Energy Center, KIST, South Korea) for his help in the isotope analyses. This work was supported by the Advanced Biomass R&D Center (ABC) of the Global Frontier Project and by the National Research Foundation of Korea (Grant no. NRF-2009-C1AAA001-2009-0093499) both of which are funded by the Ministry of Education, Science and Technology. The authors are grateful for their support.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Robert J Mitchell or Byoung-In Sang.

Additional information

Competing interests

The authors declare no competing interests.

Authors’ contributions

MD performed the experiments, analyzed the data and drafted the manuscript; SK and BSJ helped in some experimental work. YU and RJM contributed in data interpretation; MD and RJM wrote and revised the manuscript; MD and BIS designed the study; BIS coordinated the study. All authors read and approved the final manuscript.

Electronic supplementary material

13068_2013_257_MOESM1_ESM.tiff

Additional file 1: Figure S1: Neighbor-joining tree based on nearly complete 16S rRNA gene sequences showing the relationships between the strain SGP1 and its related strains. The percentage numbers at the nodes are the levels of bootstrap support based on neighbor-joining analyses of 1000 resampled data sets. Marinococcus halophilus DSM 20408T (X90835) was used as the out group (not shown). Scale bar: 0.01 nucleotide substitution per position. (TIFF 166 KB)

13068_2013_257_MOESM2_ESM.tiff

Additional file 2: Figure S2: Effect of temperature on sucrase activity of the supernatant of B. sp. SGP1. B. sp. SGP1 was grown for 22 h in RCM supplemented with sucrose, then 50 ul of the supernatant was taken and added to 950 μl of sucrose solution (0.5 M in phosphate buffer, at pH 6.6, and different temperature) and then the liberated glucose was measured as described in the Materials and Methods. (TIFF 72 KB)

13068_2013_257_MOESM3_ESM.tiff

Additional file 3: Figure S3: Growth of B. sp. SGP1 in RCM adjusted to different pH values. This experiment was done in serum bottles without previous purging with argon and the OD600 was measured after 6 h of growth at 37°C in a shaking incubator. (TIFF 76 KB)

13068_2013_257_MOESM4_ESM.tiff

Additional file 4: Figure S4: Effect of temperature on butyric acid production by the co-culture. This experiment was done in serum bottles using RCM supplemented with sucrose. (TIFF 78 KB)

Authors’ original submitted files for images

Rights and permissions

Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Dwidar, M., Kim, S., Jeon, B.S. et al. Co-culturing a novel Bacillus strain with Clostridium tyrobutyricum ATCC 25755 to produce butyric acid from sucrose. Biotechnol Biofuels 6, 35 (2013). https://doi.org/10.1186/1754-6834-6-35

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1754-6834-6-35

Keywords