Skip to main content

Biological conversion assay using Clostridium phytofermentans to estimate plant feedstock quality

Abstract

Background

There is currently considerable interest in developing renewable sources of energy. One strategy is the biological conversion of plant biomass to liquid transportation fuel. Several technical hurdles impinge upon the economic feasibility of this strategy, including the development of energy crops amenable to facile deconstruction. Reliable assays to characterize feedstock quality are needed to measure the effects of pre-treatment and processing and of the plant and microbial genetic diversity that influence bioconversion efficiency.

Results

We used the anaerobic bacterium Clostridium phytofermentans to develop a robust assay for biomass digestibility and conversion to biofuels. The assay utilizes the ability of the microbe to convert biomass directly into ethanol with little or no pre-treatment. Plant samples were added to an anaerobic minimal medium and inoculated with C. phytofermentans, incubated for 3 days, after which the culture supernatant was analyzed for ethanol concentration. The assay detected significant differences in the supernatant ethanol from wild-type sorghum compared with brown midrib sorghum mutants previously shown to be highly digestible. Compositional analysis of the biomass before and after inoculation suggested that differences in xylan metabolism were partly responsible for the differences in ethanol yields. Additionally, we characterized the natural genetic variation for conversion efficiency in Brachypodium distachyon and shrub willow (Salix spp.).

Conclusion

Our results agree with those from previous studies of lignin mutants using enzymatic saccharification-based approaches. However, the use of C. phytofermentans takes into consideration specific organismal interactions, which will be crucial for simultaneous saccharification fermentation or consolidated bioprocessing. The ability to detect such phenotypic variation facilitates the genetic analysis of mechanisms underlying plant feedstock quality.

Background

Lignocellulosic plant biomass is comprised mostly of cell walls, which are a complex composite of proteins, lignin, and polysaccharides; the latter holds promise as raw material for biofuel production. The most abundant polysaccharide in the majority of tissues is cellulose, which exists as unbranched chains containing up to 15,000 β-(1,4)-linked glucose molecules [1]. By contrast, the shorter hemicelluloses are chemically and physically more complex [2]. The most abundant forms exist as glucan chains much shorter than cellulose or β-(1,4)-linked xylose, both with diverse side-chain substitutions of arabinose, galactose, fucose, xylose, or glucuronic acid. Biological conversion relies on an organism, such as a unicellular fungus or bacterium, which will convert these simple sugars to high-energy chemicals such as ethanol or butanol. Unlike seed starch or the soluble sugars found in phloem sap, the fermentable sugars found in cell walls are recalcitrant to extraction. The composition and interaction between the polysaccharides and lignin strongly influence their amenability for conversion to renewable fuels. Whereas lignification has extensive merits for the plant, it has adverse effects on the digestibility by ruminant and biofuel-generating microbes. For example, up to 50% of the variation in in vitro digestibility of commercial maize hybrids can be attributed to differences in their lignin content [3]. Lignin is composed ofthree monolignols: p-coumaryl, coniferyl, and sinapyl alcohols, which polymerize to form p-hydroxyphenyl, guaiacyl, and syringyl phenylpropanoid units, respectively [4]. The biosynthesis of alcohol monomers occurs in a specialized branch of phenylpropanoid metabolism, through which successive reductions, hydroxylations and methylations can occur. Crosslinking lignin with polysaccharides in the secondary cell walls of vascular tissue increases hydrophobicity, and thus gives these functional tissues the capacity to efficiently conduct water [4]. Concurrently, the polysaccharides are less accessible to enzymatic digestion or mechanical penetration by potential pathogens [5]. The pathway for lignin biosynthesis is well conserved among vascular plants, and involves at least 10 gene families, including CAD (cinnamyl alcohol dehydrogenase) and COMT[6]. Each step in the lignin pathway has been perturbed in various species, resulting in changes in lignin content, composition, and, in many cases, digestibility [7, 8].

Genetic diversity of plant cell-wall properties within species is evident in the decades of plant breeding for improved feed and forage quality in crops such as maize, sorghum, and alfalfa [9, 10]. The merits of animal feed have been tested frequently in vivo, either by evaluating animal performance in response to a particular feeding regimen, or by estimating digestibility in vivo using livestock with fistulae [11]. With the latter approach, the gastrointestinal tract of a surgically prepared animal is sampled to measure the remaining biomass. An equivalent in vitro method was developed using rumen fluid inoculum from fistulated cows [12]. Digestibility is estimated through analysis of the organic matter lost from the simulated ruminant gut conditions after 4 days of incubation. The throughput of this approach is considerably higher than in vivo, and begins to meet the needs of traditional plant-breeding efforts and genetics research. High-throughput assays to estimate feed and forage quality parameters also include compositional measurements of cellulose [13], total lignin and monomer content [14, 15], and hemicellulose content and composition [16, 17], which also serve as valid measurements of biofuel feedstock quality. Although the parallels between digestibility and amenability to conversion to biofuels might be apparent, industry standards for biofuel feedstock quality are still needed.

Regardless of species, all new crop varieties must meet certain standards for industrial-processing efficiency and consumer-market quality. Beyond the expectation of high biomass yield with few inputs on marginal land, conversion quality standards for energy crops have yet to be defined by the biofuels industry. Recently, several methods, including some high-throughout platforms, have been established that treat plant samples with hydrolytic enzyme cocktails, such as fungal cellulase and xylanase/xylosidase, then assay for total sugars as a measurement of digestibility [18–22]. This approach can be taken one step further, using translational assays that mimic industrial simultaneous saccharification and fermentation (SSF) paradigms, in which the liberated sugars from the polymers can then be fermented by Saccharomyces cerevisiae to measure total ethanol yield [23, 24].

A distinct and promising approach to cellulosic biofuel production is consolidated bioprocessing (CBP) technology for conversion of biomass to fuel. CBP could lead to a significant reduction in processing costs, greater than the reductions gained from any other potential improvement, such as reducing enzyme loading, eliminating pre-treatment, or improving the processes associated with converting sugars to ethanol [25]. The recently discovered anaerobic forest soil bacterium Clostridium phytofermentans may further enhance the efficiency of CBP. This organism produces ethanol as its major fermentation byproduct during growth on all substrates tested, including cellulose, hemicellulose, pectin, and starch [26], as well as switchgrass, corn stover, and pulp wastes ([Warnick and Leschine, unpublished data). Unlike S. cerevisiae, of which only engineered strains are capable of limited pentose utilization [27],C. phytofermentans directly converts a wide array of fermentable components of biomass to ethanol, including cellulose, pectin, polygalacturonic acid, starch, xylan, arabinose, cellobiose, fructose, galactose, gentiobiose, glucose, lactose, maltose, mannose, ribose, and xylose [26]. Without the addition of exogenous cellulases and xylanases, CPB using C. phytofermentans can yield approximately 70% of the yield of SSF using engineered S. cerevisiae[28].

In this paper, we report on an assay that provides the ability to measure the influence of variation in biomass composition, pre-treatment methods, and conversion processes on digestibility, and thereby determine the potential effects of numerous variables in biofuel production. In addition to sorghum, feedstock quality was evaluated for cultivars of shrub willow (Salix spp.) and Brachypodium distachyon accessions to demonstrate the applicability of this assay for a wide range of feedstocks, from woody crops to herbaceous grasses. The C. phytofermentans bioassay provides a direct and quantitative means of assessing feedstock quality, both in terms of digestibility and conversion.

Results

Effect of feedstock concentration and time on ethanol concentration

We evaluated the effect of S. bicolor wild-type biomass concentrations ranging from 2.5 to 15.0 g/l on ethanol concentration in supernatant after 3 days of incubation with C. phytofermentans. The concentration of ethanol increased by 0.03 mg ethanol/mg feedstock, and the replicated treatments were a good fit to a linear model (Figure 1A). All subsequent experiments were conducted using 5.0 g/l (or 50 mg in 10 ml) of liquid media. To determine the effect of time after inoculation on ethanol yield, samples were incubated for 3, 5, and 7 days. Similar to the trend observed with the increased feedstock concentration, ethanol production increased linearly, by 22.13 mg ethanol/g feedstock per day (Figure 1B). Thus, to facilitate rapid assays, the shortest incubation period of 3 days was used for all subsequent experiments.

Figure 1
figure 1

Ethanol concentration increased linearly with time and feedstock concentration. Effect of feedstock concentration (A) and time (B) on ethanol yield (mean ± SEM) by Clostridium phytofermentans growing on wild-type Sorghum bicolor (three to five experiments).

Effect of lignin mutants on Clostridium phytofermentans polysaccharide metabolism and ethanol concentration

We tested wild-type Sorghum bicolor and three well-characterized brown midrib (bmr) lignin mutants of sorghum (bmr-6, bmr-12, and a double mutant bmr-6/bmr-12) with the established assay conditions. A significant and nearly two-fold range of ethanol concentration was seen (Figure 2). The wild-type sorghum yielded approximately 62 mg ethanol/g feedstock. The single mutants bmr-6 and bmr-12, which have loss-of-function mutations in the CAD and caffeic acid O-methyltransferase (COMT) genes, respectively, yielded approximately 33% more ethanol than the wild-type plant. Although not significantly different across three experiments, bmr-6 consistently yielded slightly more ethanol than bmr-12. Exhibiting a somewhat additive effect, the bmr-6/bmr-12 mutant harboring both mutations in the wild-type background yielded an average of 113 mg ethanol/g feedstock.

Figure 2
figure 2

Sorghum brown midrib lignin mutants yield more ethanol than wild type. Degrained field-grown plants were ground and incubated for 3 days with Clostridium phytofermentans. Data are mean ± SEM of three separate experiments. Bars annotated with the same letter are not significantly different at P < 0.05 (Student's t-test).

To better understand feedstock utilization by the microbe across the different sorghum genotypes, we conducted glycome profiling of all four S. bicolor genotypes before and after inoculation with C. phytofermentans, using 147 glycan-directed monoclonal antibodies (see Additional file 1) [29]. With this approach, we were able to measure the differences in the abundance of extractable polysaccharide epitopes between genotypes, and the effect of microbial inoculation (Figure 3; see Additional file 2). Significant reductions in the abundance of oxalate and carbonate-extractable cell-wall polysaccharide epitopes were noted between inoculated and uninoculated samples. There was a substantial removal of xylan epitopes recognized by the xylan-2, -3 and -4 groups of antibodies, and of pectic backbone epitopes recognized by the homogalacturonan backbone and rhamnogalacturonan-I backbone groups of antibodies from the oxalate extracts of C. phytofermentans-treated samples. The bmr mutants contained more of the oxalate-extractable xylan-4 epitopes than did the wild-type plant tissue, with bmr-6 showing the largest increase. Inoculation with C. phytofermentans resulted in removal of many of the oxalate and carbonate-extractable xylan-3 epitopes, although some xylan-3 epitopes appeared to be more resistant to degradation than others (Figure 3). The oxalate-extractable xylan-3 epitopes were substantially removed from the bmr-6 and bmr-6/bmr-12 walls after inoculation. The effect of bacterial inoculation was also dramatic in the carbonate-extractable xylan-3 epitopes from bmr-6 and bmr6-bmr-12 walls. In carbonate extracts of inoculated samples, a significant reduction in the abundance of pectic-arabinogalactan epitopes recognized by the rhamnogalacturonan-I/arabinogalactan group of antibodies was also apparent. Xyloglucan epitopes extracted by 4 mol/l potassium hydroxide (KOH) were significantly reduced in microbe-treated wild type, bmr-6 and bmr-6/bmr-12 plants, and only subtle reductions in various xylan epitopes were noted in the 1 mol/l and 4 mol/l KOH extracts. Lastly, a marked reduction in arabinogalactan epitopes recognized by the arabinogalactan-2, -3, and -4 antibodies was seen in all wall extracts from inoculated samples.

Figure 3
figure 3

Glycome profiling of Sorghum bicolor near-isogenic lines before and after inoculation with Clostridium phytofermentans. Sequential extractions using (A) oxalate, (B) carbonate, and (C) 1 mol/l and (D) 4 mol/l potassium hydroxide of five replicates of inoculated and uninoculated wild type, bmr-6, bmr-12, and bmr-6/bmr-12 sorghum were generated as described previously [29]. ELISAs using 147 monoclonal antibodies directed against glycan were used to detect the presence of cell-wall glycan epitopes in each extraction fraction, and the data are presented as heat maps (see Additional file 1; see Additional file 2). Plant biomass samples tested are indicated at the top of each column. Antibodies are grouped according to the recognized glycan are listed on the right panel. The black-red-white scale indicates the strength of the ELISA signal: bright-red, white, and dark-blue colors depict strong, medium, and no binding, respectively. AG, arabinogalactan; FUC-XG, fucosylated xyloglucan; HG, homogalacturonan; RG, rhamnogalacturonan.

The grass family Poaceae, which includes S. bicolor, has a typical stem composition consisting of cellulose, lignin, and the hemicellulose arabinoxylan [30]. Therefore, we focused our attention on the relative abundance of xylan epitopes as detected by 14 antibodies that recognize a wide range of xylan epitopes [29]. To further examine the effect of bacterial inoculation, we the assessed the difference between each of the five inoculated replicates, and calculated the mean of the uninoculated ELISA values for each genotype. These values are an estimate of polysaccharide conversion by C. phytofermentans. The antibody groups xylan-1 and xylan-2 tended not to change between treatment or genotype, or did not bind to the wall at all. Even though xylans were present in the 1 mol/l and 4 mol/l KOH-extractable fractions, only very small changes were seen after inoculation, regardless of genotype. However, within the oxalate-extractable fraction, the xylan-4 antibodies detected a significantly smaller change in wild-type xylan compared with the bmr-6 mutant xylan (Figure 4A). In the carbonate-extractable fraction, there was a smaller effect of inoculation, as detected by the xylan-3b antibodies, on the wild-type plant than on the bmr-6 and bmr-6/bmr-12 mutants (Figure 4B), and a smaller effect of inoculation, as detected by the xylan-4 antibodies, on the wild-type plant than on the bmr-12 and bmr-6/bmr-12 mutants (Figure 4B). Overall, the changes in extractable polysaccharide epitopes of the cell-wall fractions indicate that loosely integrated xylans and pectins are the primary polysaccharide targets of C. phytofermentans, and that these are more accessible in the bmr mutants than in the wild type.

Figure 4
figure 4

Polysaccharide conversion by Clostridium pytofermentans of wild type and brown midrib mutant sorghum. The remaining biomass pellet was given sequential extractions using (A) oxalate, (B) carbonate, and 1 mol/l and 4 mol/l potassium hydroxide followed by glycome profiling [29]. For each genotype, values represent the difference in extractable xylan between the mean ± SEM of five uninoculated samples and each of the inoculated samples. Xylan-3a (CCRCM-137, -149, -160), -3b (CCRCM-144, -146, -152, -155), and -4 (CCRCM-138, -139, -140, -148, -151, -153) are groups of antibodies generated using either oat or corncob xylan as an immunogen, and are classified by hierarchical clustering analysis of their recognition patterns. Data are mean ± SEM of five replicates; bars annotated with the same letter are not significantly different at P < 0.05 (Scheffé's test for multiple comparisons).

Effect of feedstock particle size on ethanol concentration

Among the many pleiotropic effects of bmr mutations in sorghum is an effect on the rigidity of cell walls, reflected as increased lodging of field-grown plants [31]. That being the case, it might be possible that differences in digestibility, measured by ethanol concentration, are a product of differences between genotypes in the particle-size distribution after grinding.

In this study, ground and washed plant material was separated based on particle size by analytical sieving before inoculation (Figure 5A). The largest fraction was greater than 125 μm. and approximately 10% of the samples were composed of particles smaller than 53 μm. The fraction ranging from 53 to 62.5 μm was tested for digestibility, and the results were similar to two experiments in which all fractions were tested (Figure 5B). The wild-type plant yielded significantly less ethanol than the bmr6 and bmr12 mutants. The double mutant once again exhibited an additive effect, with nearly twice the ethanol concentration as the wild type. Again, the single mutants were not significantly different from each other. Thus, when the particle size of the plant feedstock was held within a very narrow range, results were similar to those from experiments using the complete range of particle sizes.

Figure 5
figure 5

Genetic differences in ethanol yield are not the result of differential particle size of sorghum near-isogenic lines. (A) After grinding, replicate samples (n = 3) were subject to analytical sieving, and fractions weighed to determine the percentage of total weight. (B) The 53 to 62.5 μm sieve fraction was tested for ethanol yield as previously described. Means ± SEM annotated with the same letter are not significantly different at P < 0.05 (Student's t-test).

The effect of genetic variation on the biological conversion efficiency of sorghum landraces, Brachypodium distachyon accessions, and shrub-willow germplasm

We measured feedstock quality of 16 sorghum landrace populations originating from western, north-central, eastern, and southern regions of Africa. together with a modern cultivar developed in the USA, RTx430. The plants sampled were S1 families, that is, the progeny of a single self-fertilized individual from Plant Introductions (Plant Genetic Resources Conservation Unit, Griffin, GA, USA). The family means from the bioassay ranged from 26.5 to 39.4 mg ethanol/g feedstock (Table 1). Accessions PI 300120 and PI 365024 did not produce detectable quantities of ethanol, and were therefore not included in the analysis. The percentage of the variance contributed by each source of variation for ethanol yield was estimated by calculation of variance components (Table 2). Variance components attributed to genotype accounted for 72.49% of the variance, and there was no significant effect of S. bicolor subspecies or country of origin. Analysis of variance of three independent 'Atlas' near-isogenic line (NIL) experiments revealed that the effects of experiment and genotype were significant (P < 0.01). There was no significant genotype × experiment interaction effect, therefore, no change in the magnitude of the differences between genotypes across experiments was seen. Variance components attributed to genotype were greater than those for environment and genotype × environment interaction.

Table 1 Mean values for supernatant ethanol concentration of S1 families derived from Sorghum bicolor ssp. Accessions 3d after inoculation with Clostridium phytofermentans.
Table 2 Genetic effects account for most of the variation measured by the feedstock quality assay.

A similar continuous range in ethanol concentration was seen within a collection of 14 shrub-willow genotypes (Table 3). The genotype means showed no pattern with parentage of the seven Salix species pedigrees. The cultivar with the highest ethanol yield, 'Canastota', produced a mean concentration of 38.3 mg ethanol/g feedstock. The cultivar with the lowest feedstock quality, 'Otisco', produced 26.9 mg ethanol/g feedstock.

Table 3 Mean values for supernatant ethanol concentration of shrub willow (Salix spp.) cultivars 5d after inoculation with Clostridium phytofermentans.

Five accessions of the energy-crop model species B. distachyon exhibited a supernatant ethanol range of 47.4 to 64.0 mg ethanol/g feedstock. Scheffé's multiple range test separated the accessions into distinct groups (Figure 6). Two genetically similar accessions from Iraq, Bd2-3 and Bd3-1, were the most and second least digestible accessions, respectively. The accession yielding the lowest supernatant ethanol concentration (47.35 mg ethanol/g feedstock) was Bd30-1, which originated from Spain. The average supernatant ethanol concentrations of the sorghum landraces (31.7 mg ethanol/g feedstock) and the willow cultivars (32.1 mg ethanol/g feedstock after 5 days incubation) were considerably lower than that of the B. distachyon accessions (54.4 mg ethanol/g feedstock).

Figure 6
figure 6

Natural variation in ethanol yield among five Brachypodium distachyon accessions. Stems of fully senesced plants were ground and incubated for 3 days with Clostridium phytofermentans. Data are means ± SEM of three replicates; bars annotated with the same letter are not significantly different at P < 0.05 (Scheffé's test for multiple comparisons).

Discussion

Some key crop species, such as maize, wheat, and rice, have been domesticated from about 10,000 years ago, and have been under continuous selection for important agronomic and quality traits. Whereas progenitor species of many crops are unrecognizable from their domesticated counterparts, many of our potential energy crops are at best just a few crosses away from the wild accessions. Miscanthus, switchgrass, energy cane, and willow are just beginning the process of domestication. Thus, there is equivalent potential for improvement of fuel yield per unit of land through breeding of energy crops, but this must be accomplished in an abbreviated timeframe to have an effect on global climate change [32, 33]. One trait to improve upon is the ease of biomass deconstruction to simple sugars that are suitable for conversion to a liquid fuel [34]. Many species have demonstrated genetic variation in digestibility for both forage quality and enzymatic digestion, thus traditional plant breeding facilitated by suitable phenotypic assays, such as the bioconversion approach described here, will lead to a more efficient biofuels industry [3, 35]. The overall content and composition of cell-wall lignin has proven to be a significant determining factor for lignocellulosic biomass digestibility [7, 8]. In the 1920s, agronomists identified the first lignin mutants in maize as genotypes with characteristic browning of the leaf midrib, hence the mutant name 'brown midrib' [36]. Negative perturbation of multiple points in the lignin biosynthetic pathway results in increased digestibility in numerous species including maize, sorghum, switchgrass, tall fescue, alfalfa, tobacco, and poplar [4, 7]. In both sorghum and maize, mutations in the CAD or COMT genes have been identified as causes for the brown midrib phenotype [37–39].

The bioconversion assay described here was developed using a well-characterized set of sorghum bmr NILs, the same samples previously described by Dien. [23]. In this study, the Klason lignin content was 15% lower in the bmr-6 and bmr-12 single mutants than in wild-type sorghum, and nearly twice as low (27%) in the bmr-6/bmr-12 double mutant. Interestingly, no other differences were between the NILs were seen for carbohydrate content or non-lignin-associated measures of in vitro digestibility, such as neutral or acid detergent fiber [23]. Therefore, the differential effects of C. phytofermentans inoculation on NILs is not due to the total amount of digestible sugars in the NILs, but rather the accessibility of those polysaccharides to enzymatic digestion, which is therefore strongly influenced by lignin content. Fermentation of the same material by S. cerevisiae after dilute acid pre-treatment and cellulase and β-glucosidase enzymatic digestion produced improvements in ethanol-conversion efficiency of 11% and 17% for the single and double mutants, respectively [23]. The differences in ethanol production by NILs digested by S. cerevisiae were far less pronounced than those digested with C. phytofermentans. Considering that xylose yield was roughly constant across the NILs, and that S. cerevisiae is capable of fermenting hexoses only, it is likely that the differences in ethanol yield were due to differential enzymatic release of glucose. C. phytofermentans digests plant biomass with secreted cellulolytic enzymes, and subsequently imports and metabolizes pentoses and hexoses. Thus, ethanol yield is a combined measure of the digestibility of hemicelluloses and cellulose.

To gain a greater understanding into why ethanol yields might be greater with the bmr mutants, we assayed the polysaccharide content both before and after inoculation, using a comprehensive collection of 147 glycan-directed monoclonal antibodies to quantify changes in most major classes of cell-wall polysaccharides [29]. Considering the minute quantities of pectins in sorghum stems [40], we focused on changes in the abundance of xylan, which accounted for a substantial proportion of the overall biomass content [23]. The relative amount of extractable xylan differed between the NILs, as did the difference in extractable xylan metabolized by C. phytofermentans. Therefore, the increased quantities of ethanol produced from the bmr mutants is in part due to the increased accessibility of xylan to hydrolysis.

Although it was apparent that there are genetic differences in plant properties that influence feedstock digestibility, several analyses of sorghum, maize, and alfalfa lignin mutants revealed genotype × chemical pre-treatment interaction effects. In other words, the magnitude of the differences between genotypes or even their rank order will change depending on the method of pre-treatment. Enzymatic release of glucose from the maize lignin mutant bm1 was equivalent to that of wild type after alkali pre-treatment, but significantly greater after acid pre-treatment [19]. Relative to untreated sorghum, the difference between wild-type sorghum and the sorghum lignin mutants bmr-3 and bmr-12 diminished after dilute acid pre-treatment [41]. In the same study, mutations in other loci resulting in a bmr phenotype produced little or no change in response to pre-treatment. Similarly, the magnitude of the difference in enzymatic saccharification between wild-type alfalfa and plants downregulated for several different lignin genes varied in response to acid pre-treatment [8]. In the case of plants downregulated for CCoAMT, a significant difference from wild type was seen only in the absence of pre-treatment. By contrast, the difference in hydrolysis efficiency between C4H and HCT downregulated plants and wild type was twice as large in the absence of pre-treatment. After treatment with 15% ammonium hydroxide the hydrolysis yield potential of a large panel of sorghum accessions ranged from the same level as that of the untreated sorghum up to an approximately threefold increase over the untreated plants [42]. The goal of pre-treatment is to improve the accessibility of the polysaccharides to hydrolysis [43]. Clearly, there is a complex relationship between efficiency of feedstock utilization and pre-treatment. In this study, we attempted to maximize the ease of conducting the bioconversion quality assay and to maximize the sensitivity of the assay to detect genetic differences. Although small differences in genetic potential may not be relevant in certain industrial scenarios, detection remains important for development of energy crops. Consistent and incremental progress in modern plant breeding is the product of changing the frequencies of alleles with small additive effects. Thus, a sensitive assay is required to detect such variation, and certain pretreatments may diminish sensitivity.

We measured significant genetic variation among collections of two plant taxa considered to have excellent potential as energy crops, sorghum and shrub willow, and a model for grasses, B. distachyon[44–46]. The variation was notable considering that the samples tested by no means represent the overall genetic variation within each taxon. Thus, we would expect a wider range of phenotypic variation with an increase in sample number and diversity. The ethanol yields from sorghum were similar to those from willow, ranging from 26.5 to 39.4 mg ethanol/g feedstock. For willow, no significant correlations were seen between ethanol yield and biomass compositional data (Serapiglia and Smart, unpublished data). Most of the variation could be attributed to genetics rather than to experimental differences; consequently, routine gain from selection could be expected in the range of variation detected. At the same time, the assay could clearly identify differences between major genetic perturbations in biomass composition (typical of the bmr mutations) and continuous variation among natural and segregating populations. The most digestible genotypes from all three biofuel crop taxa yielded approximately 25% more ethanol that the most recalcitrant. This is only slightly less than the differences between wild-type sorghum and the single-gene bmr mutants. The quantity of material tested is well within the amount of stem biomass typically produced by a single plant of rapid-cycling model plants such as Arabidopsis thaliana and B. distachyon. We are currently using this system in a 96-well format, which, combined with a commercial robotics preparation [19, 22], is capable of throughput levels required by a core feedstock testing facility for plant breeding and mutant screens.

Conclusions

In this paper we have described a laboratory assay that quantifies the amount of ethanol produced by C. phytofermentans cultured on plant biomass. This approach may be useful to estimate the potential effects of pre-treatment, conversion methods, and microbial and plant genetic diversity on biofuel manufacturing. The assay is capable of measuring subtle genetic differences within energy crops and the research model species B. distachyon, making it particularly useful for genetic analysis of the mechanisms underlying plant feedstock amenability to biological conversion. The C. phytofermentans bioassay provides a means of assessing feedstock quality in terms of both digestibility and conversion.

Methods

Plant material

Genetic material consisted of Sorghum bicolor 'Atlas' (designated as the wild type for this analysis), and three near-isogenic brown midrib (bmr) mutant lines: bmr-6, bmr-12, and the double mutant bmr-6/bmr-12[47]. Degrained plant samples were collected as previously described [23] from a single field at the University of Nebraska Agricultural Research and Development Station (Lincoln, NE, USA) in the summer of 2005. Briefly, when all plants reached the hard-dough stage of maturity, samples of all four genotypes were taken from each of two replicate plots arranged in randomized complete blocks. After harvesting by flail chopper, samples were oven-dried at 50°C. In a separate experiment, 17 accessions of S. bicolor subspecies bicolor, Sorghum verticilliflorum, and Sorghum drummondii were collected in the summer of 2010 (Table 1). All but one accession, cultivar RTx430 [48], are S1 families derived from Plant Introduction accessions obtained from the Plant Genetic Resources Conservation Unit, and represent an array of S. bicolor subspecies diversity. The replicates were composited to create a single sample for each genotype. All plant biomass samples were then washed using a hot ethanol solution to remove free sugars. First, the samples were placed in 50 ml plastic screw cap tubes, filled with 70% v/v ethanol solution, and then incubated at 70° C for 1 hour. After 30 minutes, the supernatant was discarded, replaced with fresh ethanol solution, and returned to the water bath for an additional 30 minutes. Samples were then given a final rinse with a 70% (v/v) methanol solution and subsequently air-dried for 24 hours in a fume hood. Using a 25.0 ml stainless-steel grinding jar (catalog number #02.462.0213; Retsch Inc, Newtown, PA) with one stainless-steel grinding ball of 15 mm in size (catalog number 05.368.0109; Retsch) per jar, samples were homogenized (Mixer Mill MM400; Retsch) for 3 minutes at 30 Hz. Particle-size determinations were made using the USP General Test 786 Method I by analytical sieving. First, 5 g of dry plant tissue was placed on the top of the sieves and the apparatus was covered. The ground plant tissue was then passed through increasingly fine wire-mesh sieves (US standard sieves #80 (177 μm), #120 (125 μm), #160 (88 μm), #230 (62 μm), #270 (53 μm)). The sieves were shaken vigorously for 1 minute, then each sieve was carefully weighed, covered again, and the process resumed until the weight of each fraction was within 5% of the previous measurement. At that time, the fractions in each sieve were carefully collected, and final measurements taken. The weight of each sieve fraction was recorded, and divided by the total weight to determine the percentage each fraction represented.

Dry seeds from five inbred B. distachyon accessions were sown directly into 100 mm pots containing potting mix (#2; Conrad Fafard Inc., Agawa, MA, USA) Growth chamber temperature was maintained at 20°C with a 20 hour light/4 hour dark cycle at a fluence rate of 200 μmol of photons/m2/s, and relative humidity of 68.0 to 68.5. Fully senesced stems were washed and milled as described above. Seed of Bd30-1, Bd3-1, Bd21, and Bd2-3 were kindly provided by David F. Garvin (USDA-ARS) and seed of ABR8 by John Draper (Aberystwyth University, UK).

Shrub willow (Salix spp.) biomass samples from 14 genetically diverse genotypes were selected for conversion-efficiency analysis. These included commercial cultivars selected from controlled intraspecies and interspecies crosses, and unimproved accessions obtained from naturally established stands in northeastern USA and Canada. Biomass was harvested in December 2009 after the third post-coppice season from plants growing in four replicate plots in the 2006 Yield Trial in Constableville, NY, USA. Stems were chipped. and the four replicates pooled. The chips were dried to a constant weight at 65°C and rough-milled using a mill (Wiley mill; Thomas Scientific, Swedesboro, NJ, USA) with a 20-mesh screen. Further fine milling down to a particle size of 0.5 μm was performed using an analytical mill (MF 10; IKA, Willmington, NC, USA). Samples were then milled and washed as described above for sorghum.

Ethanol analysis

C. phytofermentans ISDg (ATCC 700394) was cultured in a defined medium, MQM5.1 (2.0 g/l Na H2PO4, 10.0 g/l K2HPO4, 1.0 g/l (NH4)2SO4, 1.0 g/l L-cysteine hydrochloride monohydrate, 20 ml/l XT solution (5.0 g/l xanthine and 5.0 g/l thymine in 0.06 N NaOH) 10 ml/l AA1 solution (.0 g/l of each of the following amino acids: alanine, arginine, histidine, isoleucine, leucine, methinonine, proline and valine), and 10 ml/l Bach's trace element (BTE) solution [49]), Resazurin (1 mg/l) was added as an oxidation/reduction indicator. After autoclaving, 10 ml/l CPV3 solution (20 mg/l p-aminobenzoic acid, 1 mg/l biotin, 30 mg/l folinic acid, 80 mg/l nicotinamide, 5 mg/l pantethine, 2 mg/l pyridoxal hydrochloride, 30 mg/l riboflavin, and 10 mg/l thiamine) was added.

The C. phytofermentans inoculum was initially grown in MQM5.1 with 3 g/l cellobiose using the anaerobic techniques described by Hungate [50] in 10 ml volumes in 18 × 180 mm tubes sealed with neoprene stoppers.

For the biological conversion- quality assay, Hungate tubes, containing 50 mg of plant tissue and 10 ml of MQM5.1 media were inoculated with 0.1 ml of the initial culture. Sorghum and B. distachyon samples were incubated without shaking for 72 hours at 37°C, unless specified otherwise. Willow samples were incubated for 120 hours. At that time, 1.0 ml of each sample supernatant was collected and filtered using a 0.22 μm syringe-driven filter unit (Millipore Corp., Billerica, MA, USA). Samples were separated using an HPLC (Shimadzu Corp., Kyoto, Japan) equipped with a carbohydrate analysis column (300 mm × 7.8 mm; Aminex HPX-87H; Bio-Rad Laboratories, Inc., Hercules, CA, USA) and a refractive-index detector. The column was operated at 30°C with 0.005 N sulfuric acid as the running buffer at a rate of 0.7 ml/min, and 5.0 μL sample injections. Retention time for ethanol (17.84 ± 0.02 minutes), was determined using a commercial mix (Fuel Ethanol Residual Saccharides Mix; catalog number 48468-U; Sigma-Aldrich, St Louis, MO, USA) containing glycerol, glucose, maltotriose, maltose monohydrate, lactic acid, acetic acid, dextrin, and ethanol. Standards were run at the beginning, middle, and end of every distinct HPLC analysis to ensure accuracy and precision of measurements.

Cell-wall extraction and glycome profiling

Approximately 100 mg of wild type and bmr mutant sorghum biomass, either inoculated with C. phytofermentans or uninoculated, were washed sequentially with absolute ethanol and acetone. The biomass materials were dried overnight in a fume hood at room temperature. The dry residues were sequentially extracted with increasingly harsh reagents at suspensions of 10 mg/ml (based on starting biomass weight used) to obtain fractions enriched with cell-wall components. The biomass was first incubated as a suspension in 50 mmol/l ammonium oxalate (pH 5.0) and mixed overnight at room temperature on a shaker. The suspension was then separated by centrifugation at 3400 g for 15 minutes at room temperature. The clear supernatant obtained was decanted, and saved as the ammonium oxalate fraction. The pellet was washed by suspending in the same volume of deionized water, followed by centrifugation as above. The resulting supernatant in the washing step was discarded. The pellet was then subjected to additional sequential extractions using in turn 50 mmol/l sodium carbonate (pH 10) with 0.5% sodium borohydride w/v, 1 mol/l containing 1% sodium borohydride w/v, and 4 mol/l KOH containing 1% sodium borohydride w/v following the same steps as described above to obtain the sodium carbonate, 1 mol/l KOH and 4 mol/l KOH fractions respectively. Both KOH fractions were neutralized using glacial acetic acid. All fractions were dialyzed using molecular-porous membrane tubing (Spectra/Por; Spectrum Laboratories Inc., Rancho Dominguez, CA, USA) with a nominal molecular-weight cut-off (MWCO) of 3,500 against four changes of deionized water (sample:water approximately 1:60) at room temperature for a total of 48 hours, and then lyophilized.

All extracts were first dissolved in deionized water to a concentration of 0.2 mg/ml. Total sugar content of the cell-wall extracts were then determined using the phenol-sulfuric acid method [51, 52]. The extracts were subsequently diluted to the same sugar concentration of 60 μg sugar/ml for loading onto ELISA plates (Costar 3598; Corning Costar Corp., Corning, NY, USA). A sample (50 μL) of each diluted extract was added to each well and allowed to evaporate overnight at 37°C until dry. ELISA was conducted using an array of 147 monoclonal antibodies (see Additional file 1) specific to epitopes from most major groups of plant cell-wall polysaccharides as described previously [29]. ELISA data are presented as heat maps in which antibodies are grouped based on a hierarchical clustering analysis of their binding specificities against a diverse set of plant glycans [29].

Statistical analysis

Three or four independent fermentation reactions were sampled at each time for each feedstock sample. Analysis of variance and Scheffé's test were performed using the agricolae package, and Student's t-test using a Bonferroni's correction for multiple comparisons in R v2.11.0. Significance was set a P < 0.05 or rP < 0.01.

Abbreviations

AA1:

amino acid solution

BTE:

Bach's trace element

CBP:

consolidated bioprocessing

KOH:

potassium hydroxide

NIL:

near-isogenic line

SSF:

saccharification and fermentation

XT:

xanthine-thymine.

References

  1. Brett CT: Cellulose microfibrils in plants: biosynthesis, deposition, and integration into the cell wall. Int Rev Cytol 2000, 199: 161.

    Article  CAS  Google Scholar 

  2. Scheller HV, Ulvskov P: Hemicelluloses. Annu Rev Plant Biol 2010,61(1):263-289. 10.1146/annurev-arplant-042809-112315

    Article  CAS  Google Scholar 

  3. Barriere Y, Guillet C, Goffner D, Pichon M: Genetic variation and breeding strategies for improved cell wall digestibility in annual forage crops. A review. Anim Res 2003,52(3):193-228. 10.1051/animres:2003018

    Article  CAS  Google Scholar 

  4. Bonawitz ND, Chapple C: The genetics of lignin biosynthesis: connecting genotype to phenotype. Ann Rev Genet 2010, 337-363.

    Google Scholar 

  5. Grabber JH: How do lignin composition, structure, and cross-linking affect degradability? A review of cell wall model studies. Crop Sci 2005, 45: 820. 10.2135/cropsci2004.0191

    Article  CAS  Google Scholar 

  6. Xu Z, Zhang D, Hu J, Zhou X, Ye X, Reichel K, Stewart N, Syrenne R, Yang X, Gao P, et al.: Comparative genome analysis of lignin biosynthesis gene families across the plant kingdom. BMC Bioinformatics 2009,10(Suppl 11):S3. 10.1186/1471-2105-10-S11-S3

    Article  Google Scholar 

  7. Li X, Weng J-K, Chapple C: Improvement of biomass through lignin modification. Plant J 2008,54(4):569-581. 10.1111/j.1365-313X.2008.03457.x

    Article  CAS  Google Scholar 

  8. Chen F, Dixon RA: Lignin modification improves fermentable sugar yields for biofuel production. Nat Biotech 2007,25(7):759-761. 10.1038/nbt1316

    Article  CAS  Google Scholar 

  9. Vogel KP, Jung HG: Genetic modification of herbacious plants for feed and fuel. Crit Rev Plant Sc 2001,20(1):15-49.

    Article  Google Scholar 

  10. Hill RR Jr, Shenk JS, Barnes RF: Breeding for yield and quality. In Alfalfa and alfalfa improvement. Edited by: Hanson AA, Barnes DK, Hill RR Jr. Madison: Amer Society of Agronomy; 1988:809-825.

    Google Scholar 

  11. Scales GH, Streeter CL, Denham AH, Ward GM: A comparison of indirect methods of predicting in vivo digestibility of grazed forage. J Anim Sci 1974,38(1):192-199.

    Google Scholar 

  12. Tilly J, Terry R: A two stage technique for the in vitro digestion of forage crops. J Br Grassland Soc 1963, 18: 104-111. 10.1111/j.1365-2494.1963.tb00335.x

    Article  Google Scholar 

  13. Updegraff D: Semimicro determination of cellulose in biological materials. Anal Biochem 1969,32(3):420-424. 10.1016/S0003-2697(69)80009-6

    Article  CAS  Google Scholar 

  14. Kirk T, Obst J: Lignin determination. In Methods in Enzymology. Edited by: Wood W, Kellogg S. New York: Academic Press, Inc.; 1988:87-101.

    Google Scholar 

  15. Hedges JI, Mann DC: The characterization of plant tissues by their lignin oxidation products. Geochim Cosmochim Ac 1979,43(11):1803-1807. 10.1016/0016-7037(79)90028-0

    Article  CAS  Google Scholar 

  16. Lerouxel O, Choo TS, Seveno M, Usadel B, Faye L, Lerouge P, Pauly M: Rapid structural phenotyping of plant cell wall mutants by enzymatic oligosaccharide fingerprinting. Plant Physiol 2002,130(4):1754-1763. 10.1104/pp.011965

    Article  CAS  Google Scholar 

  17. Hazen SP, Hawley RM, Davis GL, Henrissat B, Walton JD: Quantitative trait loci and comparative genomics of cereal cell wall composition. Plant Physiol 2003,132(1):263-271. 10.1104/pp.103.020016

    Article  CAS  Google Scholar 

  18. Studer MH, DeMartini JD, Brethauer S, McKenzie HL, Wyman CE: Engineering of a high-throughput screening system to identify cellulosic biomass, pretreatments, and enzyme formulations that enhance sugar release. Biotechnol Bioeng 2009,105(2):231-238.

    Article  Google Scholar 

  19. Santoro N, Cantu S, Tornqvist C-E, Falbel T, Bolivar J, Patterson S, Pauly M, Walton J: A high-throughput platform for screening milligram quantities of plant biomass for lignocellulose digestibility. BioEnerg Res 2010, 3: 93-102. 10.1007/s12155-009-9074-6

    Article  Google Scholar 

  20. Chundawat S, Balan V, Dale B: High-throughput microplate technique for enzymatic hydrolysis of lignocellulosic biomass. Biotechnol Bioeng 2008, 99: 1281-1294. 10.1002/bit.21805

    Article  CAS  Google Scholar 

  21. Navarro D, Couturier M, da Silva G, Berrin J-G, Rouau X, Asther M, Bignon C: Automated assay for screening the enzymatic release of reducing sugars from micronized biomass. Microb Cell Fact 2010,9(1):58. 10.1186/1475-2859-9-58

    Article  Google Scholar 

  22. Gomez L, Whitehead C, Barakate A, Halpin C, McQueen-Mason S: Automated saccharification assay for determination of digestibility in plant materials. Biotechnol Biofuels 2010,3(1):23. 10.1186/1754-6834-3-23

    Article  Google Scholar 

  23. Dien B, Sarath G, Pedersen J, Sattler S, Chen H, Funnell-Harris D, Nichols N, Cotta M: Improved sugar conversion and ethanol yield for forage sorghum ( Sorghum bicolor L. Moench) lines with reduced lignin contents. BioEnerg Res 2009,2(3):153-164. 10.1007/s12155-009-9041-2

    Article  Google Scholar 

  24. Fu C, Mielenz JR, Xiao X, Ge Y, Hamilton CY, Rodriguez M, Chen F, Foston M, Ragauskas A, Bouton J, et al.: Genetic manipulation of lignin reduces recalcitrance and improves ethanol production from switchgrass. Proc Natl Acad Sci USA 2011.

    Google Scholar 

  25. Lynd LR, Laser MS, Bransby D, Dale BE, Davison B, Hamilton R, Himmel M, Keller M, McMillan JD, Sheehan J, et al.: How biotech can transform biofuels. Nat Biotech 2008,26(2):169-172. 10.1038/nbt0208-169

    Article  CAS  Google Scholar 

  26. Warnick TA, Methe BA, Leschine SB: Clostridium phytofermentans sp. nov., a cellulolytic mesophile from forest soil. Int J Syst Evol Microbiol 2002,52(4):1155-1160. 10.1099/ijs.0.02125-0

    Article  CAS  Google Scholar 

  27. van Zyl W, Lynd L, den Haan R, McBride J: Consolidated bioprocessing for bioethanol production using Saccharomyces cerevisiae . Biofuels 2007, 205-235.

    Chapter  Google Scholar 

  28. Jin M, Balan V, Gunawan C, Dale BE: Consolidated bioprocessing (CBP) performance of Clostridium phytofermentans on AFEX-treated corn stover for ethanol production. Biotechnol Bioeng 2011. n/a-n/a

    Google Scholar 

  29. Pattathil S, Avci U, Baldwin D, Swennes AG, McGill JA, Popper Z, Bootten T, Albert A, Davis RH, Chennareddy C, et al.: A comprehensive toolkit of plant cell wall glycan-directed monoclonal antibodies. Plant Physiol 2010,153(2):514-525. 10.1104/pp.109.151985

    Article  CAS  Google Scholar 

  30. Smith BG, Harris PJ: The polysaccharide composition of Poales cell walls: Poaceae cell walls are not unique. Biochem Syst Ecol 1999, 27: 33. 10.1016/S0305-1978(98)00068-4

    Article  CAS  Google Scholar 

  31. Pedersen JF, Vogel KP, Funnell DL: Impact of reduced lignin on plant fitness. Crop Sci 2005,45(3):812-819. 10.2135/cropsci2004.0155

    Article  CAS  Google Scholar 

  32. Jessup R: Development and status of dedicated energy crops in the United States. In Vitro Cell Dev-Pl 2009,45(3):282-290. 10.1007/s11627-009-9221-y

    Article  Google Scholar 

  33. Heaton EA, Flavell RB, Mascia PN, Thomas SR, Dohleman FG, Long SP: Herbaceous energy crop development: recent progress and future prospects. Curr Opin Biotechnol 2008, 19: 202. 10.1016/j.copbio.2008.05.001

    Article  CAS  Google Scholar 

  34. Ragauskas AJ, Williams CK, Davison BH, Britovsek G, Cairney J, Eckert CA, Frederick WJ Jr, Hallett JP, Leak DJ, Liotta CL, et al.: The path forward for biofuels and biomaterials. Science 2006,311(5760):484-489. 10.1126/science.1114736

    Article  CAS  Google Scholar 

  35. Sarath G, Akin D, Mitchell R, Vogel K: Cell-wall composition and accessibility to hydrolytic enzymes is differentially altered in divergently bred switchgrass ( Panicum virgatum L.) genotypes. Appl Biochem Biotechnol 2008,150(1):1-14. 10.1007/s12010-008-8168-5

    Article  CAS  Google Scholar 

  36. Jorgensen JR: Brown midrib in maize and its linkage relationships. J Am Soc Agron 1931, 23: 549-557. 10.2134/agronj1931.00021962002300070005x

    Article  Google Scholar 

  37. Xin Z, Wang ML, Barkley NA, Burow G, Franks C, Pederson G, Burke J: Applying genotyping (TILLING) and phenotyping analyses to elucidate gene function in a chemically induced sorghum mutant population. BMC Plant Biol 2008, 8: 103. 10.1186/1471-2229-8-103

    Article  Google Scholar 

  38. Sattler SE, Saathoff AJ, Haas EJ, Palmer NA, Funnell-Harris DL, Sarath G, Pedersen JF: A nonsense mutation in a cinnamyl alcohol dehydrogenase gene Is responsible for the sorghum brown midrib6 phenotype. Plant Physiol 2009,150(2):584-595. 10.1104/pp.109.136408

    Article  CAS  Google Scholar 

  39. Vignols F, Rigau J, Torres M, Capellades M, Puigdomenech P: The brown midrib3 ( bm3 ) mutation in maize occurs in the gene encoding caffeic acid O-methyltransferase. Plant Cell 1995,7(4):407-416.

    Article  CAS  Google Scholar 

  40. Hatfield RD, Wilson JR, Mertens DR: Composition of cell walls isolated from cell types of grain sorghum stems. J Sci Food Agric 1999,79(6):891-899. 10.1002/(SICI)1097-0010(19990501)79:6<891::AID-JSFA304>3.0.CO;2-#

    Article  CAS  Google Scholar 

  41. Saballos A, Vermerris W, Rivera L, Ejeta G: Allelic association, chemical characterization and saccharification properties of brown midrib mutants of sorghum ( Sorghum bicolor (L.) Moench). BioEnerg Res 2008,1(3):193-204. 10.1007/s12155-008-9025-7

    Article  Google Scholar 

  42. Vandenbrink JP, Delgado MP, Frederick JR, Feltus FA: A sorghum diversity panel biofuel feedstock screen for genotypes with high hydrolysis yield potential. Ind Crop Products 2010,31(3):444-448. 10.1016/j.indcrop.2010.01.001

    Article  CAS  Google Scholar 

  43. Kumar P, Barrett DM, Delwiche MJ, Stroeve P: Methods for pretreatment of lignocellulosic biomass for efficient hydrolysis and biofuel production. Ind Eng Chem Res 2009,48(8):3713-3729. 10.1021/ie801542g

    Article  CAS  Google Scholar 

  44. Initiative TIB: Genome sequencing and analysis of the model grass Brachypodium distachyon . Nature 2010,463(7282):763-768. 10.1038/nature08747

    Article  Google Scholar 

  45. Smart LB, Cameron KD: Genetic improvement of willow ( Salix spp.) as a dedicated bioenergy crop. In Genetic Improvement of Bioenergy Crops. Edited by: Vermerris W. NY: Springer Science; 2008:347-376.

    Google Scholar 

  46. Rooney WL, Blumenthal Jr, Bean B, Mullet JE: Designing sorghum as a dedicated bioenergy feedstock. Biofpr 2007,1(2):147-157.

    CAS  Google Scholar 

  47. Pedersen JF, Toy JJ, Funnell DL, Sattler SE, Oliver AL, Grant RA: Registration of BN611, AN612, BN612, and RN613 sorghum genetic stocks with stacked -6 and -12 genes. J Plant Reg 2008,2(3):258-262. 10.3198/jpr2008.01.0065crs

    Article  Google Scholar 

  48. Miller R: Registration of RTx430 sorghum parental line. Crop Sci 1984, 24: 1224.

    Article  Google Scholar 

  49. Cote RJ, Gherna RL: Nutrition and media. In Methods for General and Molecular Microbiology. Edited by: Gerhardt P, Murray RGE, Wood WA, Krieg NR. Washington, DC: American Society for Microbiology; 1994:155-178.

    Google Scholar 

  50. Hungate RE: A roll tube method for cultivation of strict anaerobes. Methods Microbiol 1969, 3B: 117-132.

    Article  CAS  Google Scholar 

  51. DuBois M, Gilles KA, Hamilton JK, Rebers PA, Smith F: Colorimetric method for determination of sugars and related substances. Anal Chem 1956,28(3):350-356. 10.1021/ac60111a017

    Article  CAS  Google Scholar 

  52. Masuko T, Minami A, Iwasaki N, Majima T, Nishimura S-I, Lee YC: Carbohydrate analysis by a phenol-sulfuric acid method in microplate format. Anal Biochem 2005,339(1):69-72. 10.1016/j.ab.2004.12.001

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This research was supported by Office of Science (BER) Department of Energy Grant DE-FG02-08ER64700DE to SPH and by the BioEnergy Science Center (SP, HM, VB, MGH), which is a US Department of Energy Bioenergy Research Center supported by the Office of Biological and Environmental Research in the DOE Office of Science. We thank Brian Whitcomb (School of Public Health, University of Massachusetts Amherst) for assistance with statistical analysis. We thank Dominick Matos and Jessica Sysopha (Biology Department, University of Massachusetts Amherst) for expert assistance with micrograph image preparation and sample preparation, respectively. The CCRC series of plant glycan-directed antibodies was generated with support from the National Science Foundation Plant Genome Program (DBI-0421683) to MGH. We thank the Plant Genetic Resources Conservation Unit for providing sorghum accessions. We thank George Huber (Department of Chemical Engineering, University of Massachusetts Amherst) and the UMass Biofuels Research Laboratory for generous access to the HPLC equipment.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Samuel P Hazen.

Additional information

Competing interests

TAW and SBL have equity interest in Qteros, Inc.

Authors' contributions

The experiments were conceived and designed by SJL, TAW, SP, JGAM, NFY, DJS, SBL, and SPH, and performed by SJL, SP, JGAM, HM, VB, and JFP. JFP, MGH, MJS and LBS contributed new reagents/analytical methods. SPH analyzed the data, and SJL, TAW, SP, MGH, MJS, and SPH wrote the paper. All authors read and approved the final manuscript.

Electronic supplementary material

13068_2011_150_MOESM1_ESM.PDF

Additional file 1: Schematic with hyperlinks to detailed descriptions of each antibody in the glycome platform. (PDF 75 KB)

13068_2011_150_MOESM2_ESM.XLS

Additional file 2: Raw ELISA binding of data from four cell-wall extraction using 147 glycan-directed antibodies of Sorghum bicolor near-isogenic lines. (XLS 406 KB)

Authors’ original submitted files for images

Rights and permissions

Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Lee, S.J., Warnick, T.A., Pattathil, S. et al. Biological conversion assay using Clostridium phytofermentans to estimate plant feedstock quality. Biotechnol Biofuels 5, 5 (2012). https://doi.org/10.1186/1754-6834-5-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1754-6834-5-5

Keywords